[Asterisk-Users] Oh this is bad.... bindaddr and rtp traffic

[Douglas Garstang]

Pardon my candour, but for a product Digium calls 'enterprise grade' it sure seems to be missing a few features.

-----Original Message-----
From: Alexander Lopez [mailto:Alex.Lopez at OpSys.com]
Sent: Tuesday, March 07, 2006 9:39 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Oh this is bad.... bindaddr and rtp
traffic


Asterisk does not like multiple interfaces in the way you are configured. You can either:

A) use the bindaddr in the sip.conf to limit where the packsge come and go.

B) use an outside traffic manager

Look up the archives, kpf explained why this would not work, as asterisk can't do load balancing at this time


-----Original Message-----
From: "Robert Webb" <asterisk at ropeguru.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Sent: 3/7/06 11:27 AM
Subject: Re: [Asterisk-Users] Oh this is bad.... bindaddr and rtp traffic


On Tue, 7 Mar 2006 09:12:25 -0700
  "Douglas Garstang" <dgarstang at oneeighty.com> wrote:
> I have a configuration where RTP traffic is going out 
>interface pub0, and coming back into through pub1.
> I have bindaddr=0.0.0.0 in sip.conf, and a netstat -an 
>shows:
> 
> udp        0    788 0.0.0.0:5060            0.0.0.0:*
> 
> which means that Asterisk is listening on all addresses 
>(on all interfaces?).
> 
> Anyway, when the RTP traffic comes back in on interface 
>pub0, Asterisk does nothing with it. A 'rtp debug' shows 
>it's receiving the RTP packets, it just seems it does 
>nothing with them.
> 
> Anyone seen this?
> 
> Doug.
> 
> 

I thought all RTP was controlled through rtp.conf and only 
the SIP traffic was controlled through SIP.conf. I am not 
sure what settings, beside the RTP port range, you can out 
into the rtp.conf though.

Robert
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users