[Asterisk-Users] Problem getting two x200p cards working on 1.2.4
Guillermo Salas M
gsalas at manta.telconet.net
Mon Mar 6 14:25:36 MST 2006
Hi, I using asterisk 1.2.4 on a CentOS with Linux 2.6.9-22.0.2.ELsmp
kernel.
I've two x100p cards connected, only one card is reconigzed by asterisk.
02:01.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
Modem/ISDN interface
02:02.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip
compatible 10/100 Ethernet (rev 31)
02:03.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
Modem/ISDN interface
This is the cli output for zap show channels :
My /etc/zaptel.conf :
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
# Span 1: WCFXO/1 "Generic Clone Board 2"
fxsks=1
# Span 2: ZTDUMMY/1 "ZTDUMMY/1 1"
# Global data
loadzone = us
defaultzone = us
My /etc/asterisk/zapata-auto.conf
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is
intended
; to be #include-d by /etc/zapata.conf that will include the global
settings
;
callerid=asreceived
; Span 1: WCFXO/1 "Generic Clone Board 2"
signalling=fxs_ks
; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 1
context=from-pstn
group=0
channel => 1
; Span 2: ZTDUMMY/1 "ZTDUMMY/1 1"
This is the corresponding 'lspci -vv -n' for my two cards:
02:01.0 Class 0780: e159:0001
Subsystem: 8086:0003
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 201
Region 0: I/O ports at b800 [size=256]
Region 1: Memory at feaff000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA PME(D0
+,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:03.0 Class 0780: e159:0001
Subsystem: 8086:0003
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 177
Region 0: I/O ports at b000 [size=256]
Region 1: Memory at feafd000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA PME(D0
+,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
And dmesg shows:
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0340020(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth0: no IPv6 routers present
Freed a Wildcard
Unregistered Tormenta2
Zapata Telephony Interface Unloaded
Zapata Telephony Interface Registered on major 196
Zaptel Version: Echo Canceller: KB1
Registered Tormenta2 PCI
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 201
Failed to initailize DAA, giving up...
wcfxo: probe of 0000:02:01.0 failed with error -5
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 177
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Generic Clone
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)
Any ideas?
--
Guillermo Salas M.
Telconet S.A. Manta
Calle 15 y Av. 24 Esq.
Phone : 593 5 262 8071
Mobile: 593 9 985 5138
SIP : 105 at sip.manta.telconet.net
e-mail: gsalas at manta.telconet.net
www : http://www.telconet.net
http://www.telcocarrier.net
Linux User: 255902
Soporte en Linea en http://www.manta.telconet.net
Please avoid sending me Word or PowerPoint attachments.
See http://www.fsf.org/philosophy/no-word-attachments.html
More information about the asterisk-users
mailing list