[Asterisk-Users] Problem with libpri?

[McQuiggan, Mark xt46480]

While testing a problem with "spontaeously" and "occasionally" rebooting
asterisk, I came upon this problem:
 
Program received signal SIGSEGV, Segmentation fault.

[Switching to Thread -1210770512 (LWP 11346)]

0x002e3fe1 in pri_release_timeout (data=0x93a0478) at q931.c:2589

2589 q931.c: No such file or directory.

in q931.c

 

q931.c is in libpri, function pri_release_timeout, and line 2589 reads: 

        if (pri->debug & PRI_DEBUG_Q931_STATE)
                pri_message(pri, "Timed out looking for release
complete\n");

 

PRI Debug was not on in the asterisk console.  

Any ideas?  My asterisk restarts about twice a day, and drops any current
calls in the process.

Regards, 

Mark McQuiggan

 

 

_
This message and any attachments are intended only for the use of the addressee and
may contain information that is privileged and confidential. If the reader of the 
message is not the intended recipient or an authorized representative of the
intended recipient, you are hereby notified that any dissemination of this
communication is strictly prohibited. If you have received this communication in
error, please notify us immediately by e-mail and delete the message and any
attachments from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060305/b2f4813e/attachment.htm