[Asterisk-Users] Problem with two cards Digium

[Bart Fisher]

I'll guess the TE410P is being loaded first - Try swapping entries in 
zaptel.conf and zapata.conf

Bart


----- Original Message ----- 
From: "Bartosz Supczinski" <Bartosz.Supczinski at dir.pl>
To: "Asterisk-Users" <asterisk-users at lists.digium.com>; "Asterisk-Dev" 
<asterisk-dev at lists.digium.com>
Sent: Tuesday, February 28, 2006 6:57 PM
Subject: [Asterisk-Users] Problem with two cards Digium


> Hello,
>
> I`ve got a problem which I can`t deal with. I own 2 cards - TDM2400P and 
> TE410P. I`ve put them into a HP Proliant DL380 G4 server, compiled the 
> drivers according to the manual. Unfortunetly there are both cards 
> channels are configured in zaptel.conf file the first module (in this 
> file) sends an error.
>
> For configuration:
>
> span = 1, 1, 0, ccs, hdb3, crc4
> fxsks = 21-24
> bchan = 25-39, 41-55
> dchan = 40
>
> root# modprobe zaptel
> root# modprobe wctdm24xxp
> ------------------------------
> ZT_CHANCONFIG failed on channel 25: No such device or address (6) FATAL: 
> Error running install command for wctdm24xxp
>
> For configuration:
>
> span = 1, 1, 0, ccs, hdb3, crc4
> bchan = 1-15, 17-31
> dchan = 16
> fxsks = 145-148
>
> root# modprobe zaptel
> root# modprobe wct4xxp
> ----------------------
> ZT_CHANCONFIG failed on channel 145: No such device or address (6) FATAL: 
> Error running install command for wct4xxp
>
> If the configuration applies only a single card the modules are loaded 
> correctly. The analog card is equiped with one FXO module, which is placed 
> in the last joint. I`ve disabled hyperthreading in my kernel and in BIOS, 
> interrupts are not shared. Besides I`ve put the cards in other slots, 
> switched on and off ACPI and other functions in BIOS as well as in my 
> kernel. Maybe the problem is in the drivers?
>
> I`ve attached some information which might be useful.
> http://www.dir.pl/~supczinskib/logs.tgz
>
> -- 
> With best regards
> Bartosz Supczinski
> IT Manager
>
>
> DIR
> Konstytucji 3 Maja 2
> 86-300 Grudziadz
> POLAND
> www.dir.pl
>
> t.: +48 (56) 6440100
> f.: +48 (56) 6440111
> m.: +48 (504) 019040
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>