[Asterisk-Users] Re: sipura 841 mass provisioning

[C F]

Speaking of provisioning the Sipura using the xml files. I ran into a
problem where I'm trying to include in the dialplan that when 9 is
dialed it should not be sent which requires something like this:
|<9,:>1xxxxxxxxxx| (I might be wrong on the ecact thing, since I'm
writing this from memory)
However the configs would not load at all, I guess because it gets
confused with the <> which are used in xml as xml tags. Anybody knows
of a workaround?


On 3/2/06, Josh Dady <jpd at indecisive.com> wrote:
> On Mar 2, 2006, at 2:15 AM, Vahan Yerkanian wrote:
>
> > Reboot once again and it picks up the new config. Two-step
> > provisioning takes a couple of reboots to insure the device has
> > reconfigured itself. Applies to 2100, 3000, 841 and 941 models.
>
> I've had good results on our 942 by setting the resync interval
> extremely short in the initial configuration file -- it doesn't seem
> to immediately follow the new config file path the way the Snoms do:
>
>      <Resync_Periodic ua="na"> 5 </Resync_Periodic>
>      <Resync_Error_Retry_Delay ua="na"> 60 </Resync_Error_Retry_Delay>
>
> Just set it back to normal in the device-specific config (which in
> our case is generated by a script, so the initial file only serves to
> forward the phone to the real config source).
>
> --
> Joshua P. Dady
> http://www.indecisive.com/
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>