[Asterisk-Users] OT - Cisco IP Phone and PC in diferent VLANs (with 802.1x)

[Wojtek]

That's the whole idea to have them on separate vlans. You configure your 
phone to a tagged vlan and use untagged for your pc. That's it
Wojtek
PS: Just go to the network setup on your phone..

Joao Pereira wrote:
> Hello to all
> I would like to know If some of you have already configured an Cisco IP 
> Phone (7940 or 7960) to work in a different VLAN than the PC that is 
> connected through the phone switch?
> I know that this can be done with the Skinny firmware, but I dont if it 
> works with the SIP firmware.
> 
> The Cisco technical staff told me that these phones dont support 802.1x 
> but can work as pass-through. This way I can still use the PCs with 
> 802.1x and the phones in the same Ethernet plug.
> 
> Did someone made it with the Cisco IP phones? What configuration do I 
> need in the phones and in the switch?
> Thanks
> Joao Pereira
> 
> 
> 
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users