[Asterisk-Users] Re: Polycom Default Ring Volume [OT]

[Anton Krall]

Of course! :) 

|-----Original Message-----
|From: asterisk-users-bounces at lists.digium.com 
|[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of C F
|Sent: Wednesday, March 01, 2006 7:13 AM
|To: Asterisk Users Mailing List - Non-Commercial Discussion
|Subject: Re: [Asterisk-Users] Re: Polycom Default Ring Volume [OT]
|
|Anton, ya da man. Can I hire you?
|
|On 2/28/06, Anton Krall <akrall-lists at intruder.com.mx> wrote:
|>  Guys, I think this might help everybody that has polycom phones.
|>
|> Polycom never answered my email but after some testing I found the 
|> settings to control default volumes after reboot:
|>
|> For configuring the speakerphone volume after a phone 
|restart (default
|> volume) you need to set in sip.cfg:
|> voice.gain.rx.digital.chassis="X" X been the default volume 
|-15, -9 ... 0...
|> 9...15  in 3 intervals
|>
|> For configuring the ring volume after a phone restart 
|(default volume) 
|> you need to set in sip.cfg:
|> voice.gain.rx.digital.ringer="X"
|> X been the default volume -30, -27 ... 0 in -3 intervals
|>
|> For configuring the handset volume after a phone restart (default 
|> volume) you need to set in sip.cfg:
|> voice.gain.rx.digital.handset="X"
|> X been the default volume -30, -27 ... 0 in -3 intervals
|>
|> Hope this helps guys....
|>
|>
|> |-----Original Message-----
|> |From: asterisk-users-bounces at lists.digium.com
|> |[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Henry 
|> |Kwan
|> |Sent: Tuesday, February 28, 2006 1:43 PM
|> |To: asterisk-users at lists.digium.com
|> |Subject: Re: [Asterisk-Users] Re: Polycom Default Ring Volume [OT]
|> |
|> |>Kind of OT here, but just out of curiosity, how do you email
|> |them?  Do
|> |>you have an actual address, or do you just use the form on 
|their web 
|> |>site?  I've sent a bunch of requests via that form, and even
|> |though it
|> |>says I should receive a response, I never have.  I've tried going 
|> |>through a couple of resellers, too, and haven't gotten anything.  
|> |>I'm hoping you have some more direct (and effective!) means.
|> |
|> |I've contact Polycom via their web form and they emailed me back 
|> |around 2 days later.  We've purchased all of our phones via 
|> |authorized resellers.
|> |Dunno if that makes a difference or not.
|> |
|> |My question was about the button programability and their response 
|> |was that the manual was incorrect.  You can not program buttons to 
|> |have extended functionality.  You can only reprogram "hard" 
|functions 
|> |like ArrowUp or DoNotDisturb, not "soft" functions like SpeedDial.  
|> |They will be removing those references in the next revision of the 
|> |manual.
|> |