[Asterisk-Users] beronet BNS40 led blinking: not working or not connected?

[Kai Ober]

Have you startet the asterisk allready?

When i boot my machine, and dont start the astersik, the LED's keep 
flashing all day. (even when lines are connected) and
even  if /etc/init/misdn_init has been startet


TIP: First connect all Lines/Phones to the card, then start asterisk. 
not 100% sure,
but i think the card or the asterisk, or the isdn stack,  will not 
recognize any new lines added during a running asterisk "session".




Giorgio Incantalupo schrieb:
> Hi,
> I've just installed a beronet BNS40 on Asterisk 1.2.9.1. Everything 
> seems ok, asterisk gives no error (nothing inside logs) but the 4 led 
> on the back of the card (which is NOT connected to an ISDN line) are 
> red and flashing....what does it mean? Is it not properly working or 
> it means the card is not connected to any ISDN line? The card handbook 
> says the card has red led but not their meaning.
>
> TIA
>
> Giorgio Incantalupo
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>