[Asterisk-Users] Re: Digium TE410P configuration to connect with CIsco 3800

[Angelito Manansala]

Thanks for your reply.  here is my zapata.conf configuration

[trunkgroups]
[channels]
context=default
switchtype=national
signalling=pri_cpe
usecallerid=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
group=1
channel => 1-15
channel => 17-31

I noticed that when i reload chan_zap.so command there is a warning like this:

  == Parsing '/etc/asterisk/zapata.conf': Found
Jun 29 21:50:58 WARNING[739]: chan_zap.c:10886 setup_zap: Ignoring switchtype
Jun 29 21:50:58 WARNING[739]: chan_zap.c:10886 setup_zap: Ignoring signalling
    -- Reconfigured channel 1, PRI Signalling signalling
    -- Reconfigured channel 2, PRI Signalling signalling
    -- Reconfigured channel 3, PRI Signalling signalling
    -- Reconfigured channel 4, PRI Signalling signalling
    -- Reconfigured channel 5, PRI Signalling signalling
    -- Reconfigured channel 6, PRI Signalling signalling
    -- Reconfigured channel 7, PRI Signalling signalling
    -- Reconfigured channel 8, PRI Signalling signalling
    -- Reconfigured channel 9, PRI Signalling signalling
    -- Reconfigured channel 10, PRI Signalling signalling
    -- Reconfigured channel 11, PRI Signalling signalling
    -- Reconfigured channel 12, PRI Signalling signalling
    -- Reconfigured channel 13, PRI Signalling signalling
    -- Reconfigured channel 14, PRI Signalling signalling
    -- Reconfigured channel 15, PRI Signalling signalling
    -- Reconfigured channel 17, PRI Signalling signalling
    -- Reconfigured channel 18, PRI Signalling signalling
    -- Reconfigured channel 19, PRI Signalling signalling
    -- Reconfigured channel 20, PRI Signalling signalling
    -- Reconfigured channel 21, PRI Signalling signalling
    -- Reconfigured channel 22, PRI Signalling signalling
    -- Reconfigured channel 23, PRI Signalling signalling
    -- Reconfigured channel 24, PRI Signalling signalling
    -- Reconfigured channel 25, PRI Signalling signalling
    -- Reconfigured channel 26, PRI Signalling signalling
    -- Reconfigured channel 27, PRI Signalling signalling
    -- Reconfigured channel 28, PRI Signalling signalling
    -- Reconfigured channel 29, PRI Signalling signalling
    -- Reconfigured channel 30, PRI Signalling signalling
    -- Reconfigured channel 31, PRI Signalling signalling

Then my zaptel.conf is this
loadzone = us
defaultzone = us
span=1,1,0,ccs,hdb3,crc4
bchan=1-15
bchan=17-31
dchan=16 # set this to 16 for E1




On 6/29/06, Massimo Nuvoli <massimo at archivio.it> wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Angelito Manansala ha scritto:
> > Hello List,
> >
> > Can anyone here has a working configuration of any digium e1 card that is
> > connected to cisco 3800.
>
> The problem is the router configuration... you need these setups to
> try some configuration on the Linux side.
>
> Otherwise: try a cross cable (PRI cross cable is really different) and
> some configuration, with E1 you have only two/four configuration
> possibile for the D channel, 8 if you consider also CRC. All changes
> are in zaptel.conf in the span line (see the documentation).
>
> This is the last configuration found for a CISCO router with E1
> interface, is the SAME configuration for the E1 line directly coming
> from telco in italy. I made some effort to obtain the router working
> exactly as the telco. I dont have the router configuration.
>
> zaptel.conf
>
> span=1,1,0,ccs,hdb3,crc4
> bchan=1-15,17-31
> dchan=16
>
> zapata.conf
>
> signalling = pri_cpe
> channel => 1-15,17-31
> resetinterval = never
> immediate=no
> overlapdial=yes
>
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.2 (MingW32)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
> iD8DBQFEo9g33r4gvOdjXD0RApSvAKCBW7e0W7uKvbsgR9oH+PcS+J5Y6ACg04PB
> sGt2zlBRs/vP11FeDoCBDL0=
> =Lz42
> -----END PGP SIGNATURE-----
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
Lito Manansala
www.voicefidelity.net
Mobile: +63 906 437 0459
DID: (+63) 44 7906292
msn: bulcrack at elitemail.org
skype: bulcrack