[Asterisk-Users] Very bad quality with AVM Fritz!cardPCIandchan_capi

[Henk]

If you do not use USB then I would suggest to disable this in the bios.  

Henk

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of James Harper
Sent: donderdag 29 juni 2006 14:56
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Very bad quality with AVM
Fritz!cardPCIandchan_capi

> > > That is possible, how could I check that?
> > > I can see that IRQ 17 is shared between eth0 and my fritz!card
> > but I
> > > don't know if it changes anything:
> >
> > Can you try it (or eth0) in a different slot (or change IRQ's in the
> > BIOS if possible) to see if it makes any difference? That's the
> > only way
> > to know for sure, anything else is just speculation :)
> >
> > James
> 
> Unfortunately I can't, because the LAN board is integrated and I have
no
> PCI device left anymore.

You seem to have 2 wctdm adapters. Can you swap one of them with the
fritz card?

James
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users