[Asterisk-Users] Very bad quality with AVM Fritz!card PCI andchan_capi

[Armin Schindler]

On Thu, 29 Jun 2006, Mimmus wrote:
> 
> > Why did you set rx/txgain to 0.5 ? Most people use 0.8, but I 
> > use no gain by setting it to 1.0, which works here good.
> Does anyone know if you need to set rx/txgain to 0.0 to disable gain... or
> it is a percent value... 

It's percent. Meaning: gain=1.0 leaves the voice data as is.

Armin