[Asterisk-Users] Voicemail volume adjustment

[Cullin J. Wible]

Because: usg(2)1006 at internal causes the app to exit with a non-zero status,

Because: us1006 at internal|g(2) causes asterisk to hard crash.

And trying to use g2 in either case doesn't work either.

Cullin

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Dustin Wildes
Sent: Wednesday, June 28, 2006 1:03 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Voicemail volume adjustment

Why use an application like sox - when you can make the voicemail
application do it natively:

exten => s,1,Dial(SIP/100,10)
exten => s,2,Voicemail(u100 at default|ug(10))

The key is the g(10) parameter:

 From the 'show application voicemail':
 g(#) - Use the specified amount of gain when recording the voicemail
           message. The units are whole-number decibels (dB).


>
>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Technical 
>Support
>Sent: Tuesday, June 27, 2006 3:51 PM
>To: asterisk-users at lists.digium.com
>Subject: [Asterisk-Users] Voicemail volume adjustment
>
>I frequently find voice messages are emailed to users with insufficient 
>volume - barely audible. I would like to have asterisk run a sox 
>command to adjust the volume of each message before emailing (perhaps 
>once the message has been left).
>
>Has anyone done this?  Care to share the steps?
>
>Thanks,
>MD
>
>
>
>  
>

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users