[Asterisk-Users] Remote employees using Polycom 501 lose ability to receive incoming calls after few minutes.

[Tom Vile]

 FYI, when we had NAT routers at both locations setting qualify=yes
did not work.

On 6/28/06, Michiel van Baak <michiel at vanbaak.info> wrote:
> On 12:04, Wed 28 Jun 06, Von L. wrote:
> > Hello,
> > ;_____________________________________________________________
> > ;sip.conf
> > ;_____________________________________________________________
> >
> > [general]
> > port=5060
> > bindaddr=0.0.0.0
> > externip=XXX.XXX.XXX.XXX
> > localnet=XXX.XXX.XXX.XXX/255.255.255.248
> > canreinvite=no
> > tos=reliability
> > srvlookup=yes
> > disallow=all
> > allow=ulaw
> > dtmfmode=rfc2833
> > nat=yes
> > ignoreregexpire=yes
>
> Show us one of the phone entries.
> Basically check if the following is set there:
> nat=yes
> qualify=yes
>
> The qualify=yes will send packets so the nat states stay open.
> --
> Michiel van Baak
> michiel at vanbaak.eu
> http://michiel.vanbaak.eu
> GnuPG key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x71C946BD
>
> "Why is it drug addicts and computer afficionados are both called users?"
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
Tom Vile
Baldwin Technology Solutions, Inc
Consulting - Web Design - VoIP Telephony
www.baldwintechsolutions.com
Phone: 518-631-2855 x205
Fax:     518-631-2856