[Asterisk-Users] point to point T hookup?

[Jonathan Miller]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Your response leads me to further question this setup...

It's a full data T that is not provisioned. 
Being that I control the termination at each end, do I get to specify the 
encoding?


On Wednesday 28 June 2006 10:17, Sean Cook wrote:
> What kind of T1?  TDM?  Data?  What type of signaling are you planning
> to use e&m?  There is a lot of information that that question is
> lacking for anyone to advise you ...
>
> Jonathan Miller wrote:
> > I have a true leased line (a T1) between the two sites.
> >
> > What parts do I configure for Asterisk to utilized the link
> > bi-directional?
> >
> > On Wednesday 28 June 2006 09:09, Andrew Kohlsmith wrote:
> >>> On Wednesday 28 June 2006 08:48, Jonathan Miller wrote:
> >>>> An alternative is to put a router and switch at each end and
> >
> > extend a
> >
> >>>> data network to the other site for SIP traffic. Would that
> >>>> result in better quality calls?
> >>>
> >>> If you can ensure that voice traffic has top priority in all
> >>> the
> >
> > routers
> >
> >>> between the two sites, there should be no difference in voice
> >
> > quality.  For
> >
> >>> a true point-to-point system this is trivial to achieve, and
> >
> > maximizes the
> >
> >>> bang-for-buck ratio of your interoffice connection.
> >>>
> >>> Obviously having two ADSL connections is not true "point to
> >
> > point" -- you
> >
> >>> will want a leased line, or a dedicated connection to a common
> >
> > provider who
> >
> >>> has the prioritization of voice traffic in your SLA.
> >>>
> >>> You could, in theory, have higher than telco quality voice
> >>> calls
> >
> > with a
> >
> >>> VOIP system, as you are no longer restricted to 8kHz-sampled,
> >
> > 16-bit audio.
> >
> >>> Naturally the phones must support this for this to work.
> >>>
> >>>> What configuration areas are there to be set and how are they
> >
> > diffent
> >
> >>>> than just a standard PRI, which I have working now?
> >>>
> >>> If you put a point-to-point DS1 between sites, it's easy.
> >
> > Asterisk can act
> >
> >>> as a PRI CPE or CO endpoint.
> >>>
> >>> -A. _______________________________________________ --Bandwidth
> >>> and Colocation provided by Easynews.com --
> >>>
> >>> Asterisk-Users mailing list To UNSUBSCRIBE or update options
> >>> visit: http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> > _______________________________________________ --Bandwidth and
> > Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list To UNSUBSCRIBE or update options visit:
> >  http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

-----BEGIN PGP SIGNATURE-----
Version: PGP Universal 2.0.6

iQEVAwUBRKKE+JJhYmFK+jfsAQgltAf/U8jI+M953rGssIPngoWR+QBXS8NYt59q
SufUjwhxGJ8Vd1tlnFS4t4OzkJ7csD3Nfz65LEH7fW7/kS6ac2U/WOu5s53+imc+
Ter+0qK2sSwnSzP4eW364TFY4aDH7cxaHa8iqcjuUl3YnowMni29YMu/pa1fD7eD
Rfykz8Pb5pzYx/ojEp0akT9HXW44xUV65+1bakfJJPPDv4sMfLrw69KQGnsHd42t
ZqzxZYlp9GU76ice4dvwMOcRI5KZbDbXqkEx+r+ZA39E3Acap2rjDg4sAZxKa+8h
LxBOoOhugn7TjOJKUva4L48HslkhO9bTJuQc7Iqdu3CoiNUTHMgw+A==
=YPlN
-----END PGP SIGNATURE-----