[Asterisk-Users] Problem with callerid in sip to isdn gateway

[Morten Isaksen]

Hi!

I have this setup:

PABX <--ISDN30--> Asterisk 1 <--SIP--> Asterisk 2 <--ISDN30--> TELCO
Digium TE410P is used in both Asterisk 1 and 2.

When I set the CLIR bit on the PABX the Callerid / ANI is removed somewhere
between the SIP interface on Asterisk 1 and the SIP interface on Asterisk 2.

I need the callerid / ANI on Asterisk 2 in order for the TELCO to bill me
correctly.

Is there any way I can tell Asterisk 1 to keep the callerid and the clir
bit, and then let Asterisk 2 deal with it?

-- 
Morten Isaksen
http://www.misak.dk/blog/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060627/905f3863/attachment.htm