[Asterisk-Users] Meetme max users

[Matt Florell]

700MHz is very underpowered for a server that will do a lot of meetme.
I would recommend at least a 1.6GHz P4

As for the delay, that problem is usually made worse by using ztdummy
with poor zttest scores. try a different ztdummy timer source or a
hardware zaptel timer if possible because that's what meetme uses to
keep track of timing and sending out frames.

MATT---

On 6/27/06, Kai Ober <kast.asterisk at gmx.de> wrote:
> Today i put 10 users in a Meetme on a 700MHz machine.
> but the result did not satisfy me.
>
> I had all 10 Phones in front of me, cause i'm testing my asterisk.
> so i could speak on one phone and listen on any other.
> i had a delay of  >1 sec of my spoken word(s)
>
> so i think, that you should use a BIG CPU.
>
> a friend of mine mentioned, that if there are many SIP participiants in
> the conference the delay will even be greater.
> (one guy told a joke, and laughing was delayed from 10 to 30 seconds)
>
> regards
> Kai
> > thanks
> >
> > we are planing to have around 50-60 users in 1 room.
> >
> >
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>