[Asterisk-Users] Polycom 601 problems with multiple registrations

[Brian Vincent (C)]

I'm stumped on this one and any help would be greatly appreciated.

 

I'm just trying to get my Polycom 601 to have multiple extensions on it.
For example, on line 1 I want extension 21, on line 2 I want extension
22, and on line 3 I want extension 23.  Ideally I'd actually have each
extension appear on 2 lines and therefore filling up all 6.  I should be
able to do that with the reg.x.lineKeys parameter.  Anyway, I'm not even
at the point of getting multiple registrations to work, so I'll worry
about that later.  Right now the only thing that works is registering
the first extension - it registers just fine and works as expected.  No
matter what extension I put on there it works, but I only have line 1
working.  What am I doing wrong?

 

Okay, now my config.  I've got a REALLY basic set up.  I copied the
files off the wiki from krisk.org.  I completely removed ipmid.cfg
temporarily so it wouldn't interfere with this (putting it back in place
has no effect).  That leaves me with just sip.cfg and the phone cfg
file.  I'm booting with FTP.  I know the config files are loading
correctly because I can make changes and they do have an effect.  Here's
the phone20.cfg file for the phone:

 

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>

<!-- Example Per-phone Configuration File -->

<!-- $Revision: 1.59 $  $Date: 2004/05/22 00:50:41 $ -->

<phone1>

<reg

  reg.1.address="21"

  reg.1.auth.userId="21"

  reg.1.auth.password="21"

  reg.1.server.1.address="10.20.0.1"

  reg.2.address="22"

  reg.2.auth.userId="22"

  reg.2.auth.password="22"

  reg.2.server.1.address="10.20.0.1"

  reg.3.address="23"

  reg.3.auth.userId="23"

  reg.3.auth.password="23"

  reg.3.server.1.address="10.20.0.1" />

 

</phone1>

 

And sip.cfg:

 

<!-- IP Application Configuration File -->

<!--

 $Revision: 1.57.2.1 $  $Date: 2004/07/27 00:23:34 $

-->

 

<sip>

 

<voIpProt>

<local voIpProt.local.port="5060"/>

<server voIpProt.server.1.address="10.20.0.1"
voIpProt.server.1.port="5060" voIp

Prot.server.1.transport="UDPonly" voIpProt.server.1.expires="3600"
voIpProt.serv

er.1.register="1" voIpProt.server.1.retryTimeOut="0"
voIpProt.server.1.retryMaxC

ount="0" voIpProt.server.1.expires.lineSeize="30"/>

 

        <SIP voIpProt.SIP.useRFC2543hold="1" voIpProt.SIP.lcs="0"
voIpProt.SIP.sendCompactHdrs="0" voIpProt.SIP.WM50="0"
voIpProt.SIP.keepalive.sessionTimers="0"
voIpProt.SIP.requestURI.E164.addGlobalPrefix="">

<outboundProxy voIpProt.SIP.outboundProxy.address=""
voIpProt.SIP.outboundProxy.port="5060"/>

<alertInfo voIpProt.SIP.alertInfo.1.value="AA"
voIpProt.SIP.alertInfo.1.class="3 "/>

<alertInfo voIpProt.SIP.alertInfo.2.value="RA"
voIpProt.SIP.alertInfo.2.class="4 "/>

 

        <requestValidation voIpProt.SIP.requestValidation.1.request=""
voIpProt.SIP.requestValidation.1.method=""
voIpProt.SIP.requestValidation.1.request.1.event="">

<digest voIpProt.SIP.requestValidation.digest.realm="10.20.0.1"/>

</requestValidation>

<specialEvent voIpProt.SIP.specialEvent.lineSeize.nonStandard="1"
voIpProt.SIP.specialEvent.checkSync.alwaysReboot="0"/>

<conference voIpProt.SIP.conference.address=""/>

</SIP>

</voIpProt>

 

        <dialplan dialplan.impossibleMatchHandling="2"
dialplan.removeEndOfDial=

"1">

<digitmap
dialplan.digitmap="[2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxx

xxx|[2-9]xxxT" dialplan.digitmap.timeOut="3"/>

 

        <routing>

<server dialplan.routing.server.1.address=""
dialplan.routing.server.1.port="506

0"/>

<emergency dialplan.routing.emergency.1.value="911"
dialplan.routing.emergency.1

.server.1="1"/>

</routing>

</dialplan>

 

        <logging>

 

        <level>

<change log.level.change.sip="4" log.level.change.sip.obs="5"/>

</level>

</logging>

</sip>

-------------------
Brian Vincent
Copper Mountain Telecom
vincentb at coppercolorado.com 

 

______________________________________________________________________________________________________________

Confidentiality Warning: This message and any attachments are intended only for the use of the intended recipient(s), 
are confidential, and may be privileged. If you are not the intended recipient, you are hereby notified that any review, 
retransmission, conversion to hard copy, copying, circulation or other use of this message and any attachments is strictly 
prohibited. If you are not the intended recipient, please notify the sender immediately by return e-mail, and delete this 
message and any attachments from your system. Thank you.
______________________________________________________________________________________________________________

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060621/e81bf7b4/attachment.htm