[Asterisk-Users] nortel meridian option 11c and asterisk te110p

[Julian Lyndon-Smith]

You need a cross over cable if you are linking the nortel to the te110p.

http://www.merit.edu/mail.archives/nanog/2005-02/msg00546.html

Julian.

Muhammad Zeeshan Latif wrote:
> Hi sir
> 
> 
> 
> I am trying to interconnect meridian option 11c 2mb pri card ntbk50aa
> with * pri card te110p.
> 
> But the problem that I am facing is that both card do not see each other
> the te110p card does not come out of red alarm and same is the case with
> meridian ntbk50aa.
> 
> Hence I can not expect d-channel negociation to take place.
> 
> Can u guide me some what about this as the card u used is a little
> different than the one I am using in m1. I have tried both t1 and e1 but
> same problem remains. I have tested both card so no chance of error
> there , cabling checked many a times no error there.
> 
> When I connect some times * te110p card shows yellow/red/rec alarm.
> And on ntbk50aa card some times red light turn off and yellow comes on
> and after some times the yellow light turn off and red comes on
> permanently.
> 
> 
> 
> 
> Best Regards
> Mohammad Zeeshan Latif
> Sr. WAN Engineer
> NETWORK DIRECTORATE
> 
> 0092-51-90391020, 0092-321-5181157
>  
>  
>  
>  
>  
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>