[Asterisk-Users] Asterisk voicemail problem with isdn avm fritz!card

[Armin Schindler]

On Mon, 19 Jun 2006, Benjamin Sebbah wrote:
> ----- Original Message -----
> From: Armin Schindler <armin at melware.de>
> Date: Monday, June 19, 2006 1:48 pm
> Subject: Re: [Asterisk-Users] Asterisk voicemail problem with isdn avm
> fritz!card
> 
> > On Mon, 19 Jun 2006, Benjamin Sebbah wrote:
> > > Hello everyone,
> > > 
> > > I have Asterisk SVN-trunk-r7498 installed on a server (celeron 
> > 2.4 Ghz,
> > > 256MB) with a TDM40b a TDM04b and an avm fritz!card pci. 
> > > I experience a problem with voicemail: my messages are good 
> > unless the
> > > incoming call comes from isdn, which means via the avm 
> > fritz!card. In
> > > this case (and in this case only) the message is disjointed and I 
> > can> hear at most 1 second out of a 1 minute message.
> > > If the message comes from TDM400 then the message is perfect (even
> > > though I still have a problem to detect the end of the call but 
> > that's> no big deal)
> > > If the incoming call is answered (and not sent to voicemail 
> > because busy
> > > or unavail) the sound is perfect.
> > 
> > I never heard of such a problem before. Can you please create a log 
> > of such 
> > a call with
> >  set verbose 9
> >  capi debug
> > (might be big)
> > 
> > Armin
> > 
> Actually I have just found a solution:
> 
> in capi.conf I've changed:
> rxgain=0.8
> txgain=0.8
> echosquelch=1
> echocancelold=yes
> 
> to 
> 
> rxgain=1
> txgain=0.8
> echosquelch=2
> echocancelold=no
> 
> and this works. Thanks for your help.

Ah, sure. I think it's just the echosquelch setting. echocancelold applies 
for Eicon cards only and echosquelch causes frame-length changes.

Armin
 
> > > I hope you'll be able to help me.
> > > 
> > > Thanks
> > > 
> > > Benjamin SEBBAH
> > > ADUNEO France
> > > 
> > > Here are my config files:
> > > </etc/asterisk/capi.conf>
> > > [general]
> > > nationalprefix=0
> > > internationalprefix=00
> > > rxgain=0.8
> > > txgain=0.8
> > > language=fr      ;set default language
> > > 
> > > 
> > > [ISDN1]          ;this example interface gets name 'ISDN1' and 
> > may be any
> > >                  ;name not starting with 'g' or 'contr'.
> > > isdnmode=DID     ;'MSN' (point-to-multipoint) or 'DID' (direct 
> > inward dial)
> > >                  ;when using NT-mode, 'DID' should be set in any 
> > case> incomingmsn=*    ;allow incoming calls to this list of 
> > MSNs/DIDs, * = any
> > > controller=1     ;capi controller number to use
> > > group=9          ;dialout group
> > > softdtmf=on      ;enable/disable software dtmf detection, 
> > recommended> for AVM cards
> > > relaxdtmf=on     ;in addition to softdtmf, you can use relaxed dtmf
> > > detection
> > > accountcode=     ;Asterisk accountcode to use in CDRs
> > > context=capi-in  ;context for incoming calls
> > > echosquelch=1   ;_VERY_PRIMITIVE_ echo suppression
> > > echocancelold=yes;use facility selector 6 instead of correct 8
> > > (necessary for older eicon drivers)
> > > echotail=64     ;echo cancel tail setting
> > > devices=2        ;number of concurrent calls on this controller
> > >                  ;(2 makes sense for single BRI, 30 for PRI)
> > > 
> > > 
> > > 
> > > and the interesting lines from </etc/asterisk/extensions.conf>:
> > > [general]
> > > static=yes
> > > writeprotect=no
> > > autofallthrough=yes
> > > clearglobalvars=no
> > > priorityjumping=no
> > > 
> > > [globals]
> > > PIERRE=Zap/1
> > > MARC=SIP/marc
> > > PATRICK=Zap/3
> > > PROSPECT=Zap/2
> > > OPENSPACE=Zap/4
> > > FT_FREE=Zap/5
> > > FT_ALICE=Zap/6
> > > VOIP_FREE=Zap/7
> > > VOIP_ALICE=Zap/8
> > > NUMERIS=CAPI/ISDN1
> > > 
> > > [macro-repondeur]
> > > ;   ${ARG1} - Extension  (we could have used ${MACRO_EXTEN} here 
> > as well
> > > ;   ${ARG2} - Device(s) to ring
> > > ; 
> > > exten => s,1,Dial(${ARG2},15,rWw)                	; Ring the 
> > interface, 15 seconds maximum
> > > exten => s,2,Goto(s-${DIALSTATUS},1)        	; Jump based on status
> > > (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER)
> > > exten => s-NOANSWER,1,Voicemail(u${ARG1})	; If unavailable, send to
> > > voicemail w/ unavail announce
> > > ;exten => s-NOANSWER,2,Goto(default,s,1)        	; If they press 
> > #, return to start
> > > exten => s-BUSY,1,Voicemail(b${ARG1})        	; If busy, send to 
> > voicemail w/
> > > busy announce
> > > ;exten => s-BUSY,2,Goto(default,s,1)        	; If they press #, 
> > return to start
> > > exten => _s-.,1,Goto(s-NOANSWER,1)                	; Treat 
> > anything else as no answer
> > > exten => a,1,VoicemailMain(${ARG1})        	; If they press *, 
> > send the user
> > > into VoicemailMain
> > > 
> > > [capi-in]
> > > 
> > > ;standard: fait tout sonner
> > > exten => 3090,1,Answer;
> > > ;exten => 
> > 3090,2,Macro(repondeur,8427,${OPENSPACE}&${MARC}&${PIERRE});> exten 
> > => 3090,2,Macro(repondeur,8427,${OPENSPACE}&${PIERRE});
> > > 
> > > 
> > > ;Service technique
> > > exten => 3091,1,Answer;
> > > ;exten => 3091,2,Macro(repondeur,3091,${OPENSPACE}&${MARC});
> > > exten => 3091,2,Macro(repondeur,3091,${OPENSPACE});
> > > 
> > > 
> > > ;Service commercial
> > > exten => 3092,1,Answer;
> > > exten => 3092,2,Macro(repondeur,3092,${PATRICK});
> > > 
> > > 
> > > ;Direction technique
> > > exten => 3093,1,Answer;
> > > ;exten => 3093,2,Macro(repondeur,3093,${MARC});
> > > exten => 3093,2,Macro(repondeur,3093,${OPENSPACE});
> > > 
> > > 
> > > ;non assigne pour le moment fait sonner uniquement le DECT
> > > exten => 3094,1,Answer;
> > > exten => 3094,2,Macro(repondeur,3094,${OPENSPACE});
> > > 
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com --
> > > 
> > > Asterisk-Users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > > 
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> > 
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> > 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>