[Asterisk-Users] Dropped calls continued

[Dan Elder]

Hi All... Well, I'm still experiencing LOTS of dropped calls since
installing the new (non pri) T1 here... I keep noticing a few things in the
logs when this happens, namely the "Wink/Flash" statements and the "Didn't
get a frame" messages...

Anyone got any ideas on if this is a telco issue, a wiring issue, or an
asterisk issue? Been trying to track this down via all 3 paths, but not
having any luck.

Jun 15 13:33:00 DEBUG[11577] chan_zap.c: Exception on 18, channel 2
Jun 15 13:33:00 DEBUG[11577] chan_zap.c: Got event Wink/Flash(3) on channel
2 (index 0)
Jun 15 13:33:00 DEBUG[11577] chan_zap.c: Ignoring wink on channel 2
Jun 15 13:33:01 DEBUG[11577] chan_zap.c: Exception on 18, channel 2
Jun 15 13:33:01 DEBUG[11577] chan_zap.c: Got event Hook Transition
Complete(12) on channel 2 (index 0)
Jun 15 13:33:03 DEBUG[11577] chan_zap.c: Exception on 18, channel 2
Jun 15 13:33:03 DEBUG[11577] chan_zap.c: Got event Dial Complete(9) on
channel 2 (index 0)
Jun 15 13:33:03 DEBUG[11577] chan_zap.c: No echo cancellation requested
Jun 15 13:33:12 DEBUG[11577] chan_zap.c: Exception on 18, channel 2
Jun 15 13:33:12 DEBUG[11577] chan_zap.c: Got event Ring/Answered(2) on
channel 2 (index 0)
Jun 15 13:33:12 VERBOSE[11577] logger.c:     -- Zap/2-1 answered
SIP/137-b1f2
Jun 15 13:33:20 DEBUG[11577] chan_zap.c: Exception on 18, channel 2
Jun 15 13:33:20 DEBUG[11577] chan_zap.c: Got event On hook(1) on channel 2
(index 0)
Jun 15 13:33:20 DEBUG[11577] channel.c: Didn't get a frame from channel:
Zap/2-1
Jun 15 13:33:20 DEBUG[11577] channel.c: Bridge stops bridging channels
SIP/137-b1f2 and Zap/2-1
Jun 15 13:33:20 DEBUG[11577] chan_zap.c: Hangup: channel: 2 index = 0,
normal = 18, callwait = -1, thirdcall = -1
Jun 15 13:33:20 DEBUG[11577] chan_zap.c: Set option TDD MODE, value: OFF(0)
on Zap/2-1
Jun 15 13:33:20 DEBUG[11577] chan_zap.c: Updated conferencing on 2, with 0
conference users


Thanks as always!