[Asterisk-Users] FW: Issue in configuring TDM400P

[Aarthy G - TLS, Chennai.]

Hi,

I have installed a TDM400P in a PC which runs RedHat Linux 3.2.2-5. 
There is an FXS module connected to the first slot of TDM400P and an FXO
module connected to the fourth slot. 
This card is detected by the operationg system, which I was able to  make
sure using the output of lspci command. 
I modified the configuration files zaptel.conf, zapata.conf and
extensions.conf. 
When I execute the command `ztcfg`, it displays the details of two channels.
But if I start asterisk and excute the command `zap show channels` from the
asterisk console it is not displaying the 
channels. Also I have configured `immediate=no` in zapata.conf file, but no
dial tone is getting played
when I lift the phone connected to the FXS port.
I have attached the configuration files and listed the output of the
commands that I tried out.
Please let me know what else has to be done to generate a dial tone and to
receive or orginate a call from the FXO and FXS ports. 

Output of `lspci` shows:

00:00.0 Host bridge: Intel Corp. 82810 GMCH [Graphics Memory Controller Hub]
(rev 03)
00:01.0 VGA compatible controller: Intel Corp. 82810 CGC [Chipset Graphics
Controller] (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02)
00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02)
00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801AA AC'97 Audio (rev
02)
01:00.0 Communication controller: Tiger Jet Network Inc. Intel 537
01:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
----------------------------------------------------------------------------
----
Output of /sbin/ztcfg -vv

Zaptel Configuration
======================


Channel map:

Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)

2 channels configured.
----------------------------------------------------------------------------
----
Output of `zap show channels` in asterisk console displays the following:

*CLI> zap show channels
   Chan Extension  Context         Language   MusicOnHold         
 pseudo            default                                        
----------------------------------------------------------------------------
-----
Thanks,
Aarthy.G


DISCLAIMER 
The contents of this e-mail and any attachment(s) are confidential and intended for the 

named recipient(s) only. It shall not attach any liability on the originator or HCL or its 

affiliates. Any views or opinions presented in this email are solely those of the author and 

may not necessarily reflect the opinions of HCL or its affiliates. Any form of reproduction, 

dissemination, copying, disclosure, modification, distribution and / or publication of this 

message without the prior written consent of the author of this e-mail is strictly 

prohibited. If you have received this email in error please delete it and notify the sender 

immediately. Before opening any mail and attachments please check them for viruses and 

defect.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Configuration-files.zip
Type: application/octet-stream
Size: 17494 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20060614/a5d8f93d/Configuration-files.obj