[Asterisk-Users] Can this config sustain 30 users?

[Erick Perez]

BJ, when you say it is more than adequate, what do you do to calculate?
there *must* be a way to at least tell if the motherboardboard/cpu
will achieve results.
I just don't want to install it and then after a 5th user going to
call someone the asterisk begin to crash due to lack of resuources.


On 6/12/06, BJ Weschke <bweschke at gmail.com> wrote:
> On 6/12/06, Erick Perez <eaperezh at gmail.com> wrote:
> > I have this server I need to put to work.
> > The option I have is to make it work as a small office PBX with SIP
> > users and a Digium E1 Card for PSTN service.
> >
> > 24 SIP users and one E1 card in an Intel 945board (533 Front side bus)
> > with  1GB DDR 533mhz of ram, one Pentium Dual Core 2.66 ghz (FSB
> > 533MHZ) and two 80GB SATA disks.
> > Can the box sustain the load? I can add another 1gb of ram if necessary.
> >
> > Just PBX and voicemail, no fancy sutff like call recording...
> > maybe a simple autoattendant like "thank you for calling, please press
> > one for...."
> >
>
>  If it is the latest gen of Digium firmware, I'd say the box is more
> than adequate, as is.
>
> --
> Bird's The Word Technologies, Inc.
> http://www.btwtech.com/
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
------------------------------------------------------------
Erick Perez
Panama Sistemas
Integradores de Telefonia IP y Soluciones Para Centros de Datos
Panama, Republica de Panama
Cel Panama. +(507) 6694-4780
------------------------------------------------------------