[Asterisk-Users] use AT320 international call

[Min Qiu]

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> brett at websmyths.com
> Sent: Monday, June 12, 2006 2:09 PM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] use AT320 international call
> 
> 
> On 6/12/2006, "Min Qiu" <mqiu at globalinternetworking.com> wrote:
> >Hi all,
> >
> >The firmware I used is pa168s_iax2_us_151011.bin.
> >
> >My problem is the handset dial before I finished key in all 
> >the numbers, no matter how fast I managed to press the keys.  
> >It appeared it always dialed immediately, for example "011862",  
> >when I actually ment to dial 0118620xxxxxxxx.  Thus left the 
> >remaining numbers "0xxxxxxxx" unsent.
> >
> >The handset had its dial plan disabled.  It configured to use 
> >iax protocol.  My extensions.conf has this:
> >
> >exten=_01186.,1, dial(SIP/<voipprovider>,60)
> >
> >and it works fine with other iaxy and Cisco ATA.
> >
> >Anyone encounter this symptom?  Can you share your experience?
> >
> >Thanks,
> >
> >Min
> 
> Min _ I amybe shooting in the dark here but - are you using 
> inband DTMF?

You hit the target.  The default is inband DTMF and I did not
change it (do have the knoweldge to configure it).  I'll try
the other option.

Thanks for the help.

Min


> 
> My AT320 only dials after I hit the Dial button or it times 
> out.  I do NOT
> use inband DTMF.
> 
> Brett
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>