[Asterisk-Users] T1 passthrough/middleman

Nathan Bell nathanb at actarg.com
Mon Jun 12 09:40:30 MST 2006


That sounds exactly like what I want to do. I've don't have a PRI line 
(although I'm going to press for getting one soon), but for now I would 
just like a couple of pointers in getting Asterisk's dial plan set up to 
just pass the calls from one T1 to another.

Thanks a million in advance.

Mimmus wrote:

>I used this approach to gradually migrate from a legacy Alcatel PBX:
> PSTN E1 PRI --- Asterisk --- Crossed E1 cable --- Alcatel PBX
>At first, Asterisk did nothing, only passing calls to/from Alcatel.
>Then I started to use a bunch of SIP phones directly connected to Asterisk.
>Now I have the great part of extensions as SIP phones and the old PBX is
>working as a channel bank only for a few of analog devices.
>
>Configuring the dialplan to do this dirty job is not difficult but now I'm
>not able to help you because it's saturday evening and I'm at home!
>Re-try next Monday.
>
>DV
>
>
>  
>
>>-----Original Message-----
>>From: asterisk-users-bounces at lists.digium.com 
>>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
>>Nathan Bell
>>Sent: Friday, June 09, 2006 10:34 PM
>>To: Asterisk Users Mailing List - Non-Commercial Discussion
>>Subject: [Asterisk-Users] T1 passthrough/middleman
>>
>>Is it possible to act as a middle man on a T1 line?
>>
>>My installation currently has an aging Inter-Tel Axxess box 
>>with a T1 coming in (16 in, 8 out). Rather than adding and 
>>replacing phones and cards as they die, I would like to 
>>slowly migrate to a asterisk SIP installation.
>>
>>I want to take the incoming T1 line, use any available 
>>outgoing lines for outgoing SIP, intercept any incoming lines 
>>and either send them off to a SIP line or pass them through 
>>to other T1 line (going to the Axxess box), and finally take 
>>in outgoing calls from the Inter-Tel box and either send them 
>>to SIP or send them to the outside T1 line.
>>
>>How will a dual T1 card be set up in this situation? Would it 
>>be easier to use an FXO channel bank (or card) and connect 
>>analog lines to the FXS analog lines on the Inter-Tel box?
>>_______________________________________________
>>--Bandwidth and Colocation provided by Easynews.com --
>>
>>Asterisk-Users mailing list
>>To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>    
>>
>
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>Asterisk-Users mailing list
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>  
>



More information about the asterisk-users mailing list