[Asterisk-Users] GXP-2000 MultiPurpose Keys

Gareth Blades list-asterisk at linguaphone.co.uk
Fri Jun 9 07:26:11 MST 2006 

Yes you can as long as you have at least the 1.0.2.13 firmware. I have
attached the template. The multi-purpose key settings are at the end.

On Fri, 2006-06-09 at 14:41, Daniel Salama wrote:
> Is it possible to program the multi-purpose keys on a GXP-2000  
> remotely via a TFTP configuration file? If so, what are the  
> parameters to put in the configuration file?
> 
> Thanks,
> Daniel
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------


################################################################################################
## Configuration template for GXP-2000 firmware version 1.0.2.13
################################################################################################

##############################################################################
##  Advanced/System-wide Options
##############################################################################

# Admin password for web interface
P2 = admin

# Silence Suppression. 0 - no, 1 - yes
P50 = 0

# Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively)
P37 = 2

# Layer 3 QoS (IP Diff-Serv or Precedence value for RTP)
P38 = 48

# Layer 2 QoS. 802.1Q/VLAN Tag (VLAN classification for RTP)
P51 = 0

# Layer 2 QoS. 802.1p priority value (0 - 7)
P87 = 0

# No Key Entry Timeout. Default - 4 seconds.
P85 = 4

# Use # as Dial Key (if set to Yes, "#" will function as the "(Re-)Dial" key). 0 - no, 1 - yes
P72 = 1

# Local RTP port (1024-65535, default 5004)
P39 = 5004 

# Use Random Port. 0 - no, 1 - yes
P78 = 0

# Keep-alive interval (in seconds. default 20 seconds)
P84 = 20

# Use NAT IP.  This will enable our SIP client to use this IP in the SIP message. Example 64.3.153.50.
P101 =

# STUN server
P76 = stun.mycompany.com

#-------------------------------------------------------------
# Firmware Upgrade 
#-------------------------------------------------------------

# Firmware Upgrade. 0 - TFTP Upgrade,  1 - HTTP Upgrade.
P212 = 0

# Firmware Server Path
P192 =

# Config Server Path
P237 =

# Firmware File Prefix
P232 =

# Firmware File Postfix
P233 =

# Config File Prefix
P234 =

# Config File Postfix
P235 =

# Allow DHCP Option 66 to override server. 0 - No, 1 - Yes. Default is No.
# When set to Yes(1), it will override the configured provision path and method.
P145 = 0

# Automatic Upgrade. 0 - No, 1 - Yes (checking every defined days). Default is No.
P194 = 0

# Check for new firmware every () minutes, unit is in minute, default is 7 days.
P193 = 10080

# Use firmware pre/postfix to determine if f/w is required
# 0 = Always Check for New Firmware 
# 1 = Check New Firmware only when F/W pre/suffix changes 
P238 = 0

# DTMF Payload Type
P79 = 101

# Syslog Server (name of the server, max length is 64 charactors)
P207 = 

# Syslog Level (Default setting is NONE)
# 0 - NONE, 1 - DEBUG, 2 - INFO, 3 - WARNING, 4 - ERROR
P208 = 0

# NTP Server
P30 = time.nist.gov

# Allow DHCP Option 42 to override NTP server. 0 - No, 1 - Yes. Default is No.
# When set to Yes(1), it will override the configured NTP server.
P144 = 0

# Distinctive Ring Tone
# Use custom ring tone 1 if incoming caller ID is the following:
P105 =

# Use custom ring tone 2 if incoming caller ID is the following:
P106 =

# Use custom ring tone 3 if incoming caller ID is the following:
P107 =

# Disable Call Waiting. 0 - no, 1 - yes
P91 = 0

# Lock Keypad Update. 0 - no, 1 - yes
P88 = 0

####################################################################
# Primary Account (Account 1) Settings
####################################################################

# Account Active (In Use). 0 - no, 1 - yes
P271 = 1

# Account Name
P270 =

# SIP Server
P47 = sip.mycompany.com

# Outbound Proxy
P48 = proxy.mycompany.com

# SIP User ID
P35 = 8000

# Authenticate ID
P36 = 8000

# Authenticate password
P34 = 0000

# Display Name (John Doe)
P3 = 

# Use DNS SRV. 0 - No, 1 - Yes.
P103 = 0

# SIP User ID is phone number. 0 - no, 1 - yes
P63 = 0

# SIP Registration. 0 - no, 1 - yes
P31 = 1

# Unregister On Reboot. 0 - no, 1 - yes
P81 = 0

# Register Expiration (in minutes. default 1 hour, max 45 days)
P32 = 60

# Local SIP port (default 5060)
P40 = 5060

# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)
# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default 100.
P209 = 100

# SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses.
# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 400.
P250 = 400

# NAT Traversal. 0 - yes, 1 - no, 2 - No, but send keep-alive
P52 = 0

# SUBSCRIBE for MWI. (Whether or not send SUBSCRIBE for Message Waiting Indication) 0 - No, 1 - Yes.
P99 = 0

# Proxy-Require (A SIP extension to enable firewall penetration)
P197 =

# Voice Mail UserID (User ID/extension for 3rd party voice mail system)
P33 =

# Send DTMF. 0 - in audio, 1 - via RTP, 2 - via SIP INFO
P73 = 0

# Early Dial (use "Yes" only if proxy supports 484 response). 0 - no, 1 - yes
P29 = 0

# Dial Plan Prefix (dial plan prefix string).
P66 =

# Enable Call Features.  0 - no, 1 - yes
P191 = 1

# Disable Missed-Call (Missed calls will not be logged if set to Yes). 0 - no, 1 - yes
P182 = 0

# Session Expiration (in seconds. default 180 seconds. Allowed value: 90-65535)
P260 = 180

# Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260)
P261 = 90

# Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes
P262 = 0

# Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes
P263 = 0

# Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes
P264 = 0

# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes
P265 = 0

# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS
P266 = 0

# UAS Specify Refresher. 1 - UAC, 2 - UAS
P267 = 1

# Enable 100rel. 0 - no, 1 - yes
P272 = 0

# Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2
# 3 - custom ring tone 3.
P104 = 0

# Send Anonymous (caller ID will be blocked if set to Yes). 0 - no, 1 - yes
P65 = 0

# Auto Answer. 0 - no, 1 - yes
P90 = 0

# Allow Auto Answer by Call-Info. 0 - no, 1 - yes
P298 = 0

# Turn off speaker on remote disconnect. 0 - no, 1 - yes
P299 = 0

# Special Feature.    100 - Standard, 101 - Nortel MCS, 109 - RNK.
P198 = 100

#-----------------------------------------------------------------------------
# Codec/Voice Quality settings
#-----------------------------------------------------------------------------

# First codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P57 = 0

# Second codec.  0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P58 = 3

# Third codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P59 = 4

# Forth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P60 = 8

# Fifth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P61 = 18

# Sixth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P62 = 0

# Seventh codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P46 = 0

# Eighth codec.  0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P98 = 0

########################################################################
# SIP Account 2 Settings
########################################################################

# Account Active (In Use). 0 - no, 1 - yes
P401 = 0

#Account Name
P417 = 

# SIP Server
P402 =

# Outbound Proxy Server
P403 =

# Account 2 SIP User ID
P404 =

# Authenticate ID
P405 =

# Authenticate Password
P406 =

# Display Name (John Doe)
P407 =

# Use DNS SRV. 0 - No, 1 - Yes.
P408 = 0

# User ID is phone number; "user=phone". 0 - no, 1 - yes
P409 = 0

# SIP Registration. 0 - no, 1 - yes
P410 = 1

# Unregister on Reboot. 0 - no, 1 - yes
P411 = 0

# Register Expiration (in minutes. default 1 hour, max 45 days)
P412 = 60

# SIP Local port (default 5062)
P413 = 5062

# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)
# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default 100.
P440 = 100

# SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses.
# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 400.
P441 = 400

# NAT Traversal. 0 - yes, 1 - no, 2 - No, but send keep-alive
P414 = 0

# Subscribe MWI. (Whether or not send SUBSCRIBE for Message Waiting Indication) 0 - No, 1 - Yes.
P415 = 0

# Proxy Require
P418 =

# Voice Mail UserID (User ID/extension for 3rd party voice mail system)
P426 =
 
# Send DTMF method. 0 - in audio, 1 - via RTP, 2 - via SIP INFO
P416 = 0
 
# Early Dial. 0 - no, 1 - yes
P422 = 0

# Dial Plan Prefix
P419 =

# Enable Call Features. 0 - no, 1 - yes.
P420 = 1

# Disable Missed-Call (Missed calls will not be logged if set to Yes). 0 - no, 1 - yes
P442 = 0

# Default Session Expires (in seconds. default 180 seconds. Allowed value: 90-65535)
P434 = 180

# Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260)
P427 = 90

# Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes
P428 = 0

# Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes
P429 = 0

# Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes
P430 = 0

# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes
P431 = 0

# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS
P432 = 0

# UAS Specify Refresher. 1 - UAC, 2 - UAS
P433 = 1

# Enable 100rel. 0 - no, 1 - yes
P435 = 0

# Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2
# 3 - custom ring tone 3.
P423 = 0

# Send Anonymous. 0 - no, 1 - yes
P421 = 0

# Auto Answer. 0 - no, 1 - yes.
P425 = 0

# Allow Auto Answer by Call-Info. 0 - no, 1 - yes
P438 = 0

# Turn off speaker on remote disconnect. 0 - no, 1 - yes
P439 = 0

# Special Feature.    100 - Standard, 101 - Nortel MCS.
P424 = 100

#-----------------------------------------------------------------------------
# Codec/Voice Quality settings
#-----------------------------------------------------------------------------

# First codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P451 = 0

# Second codec.  0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P452 = 3

# Third codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P453 = 4

# Forth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P454 = 8

# Fifth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P455 = 18

# Sixth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P456 = 0

# Seventh codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P457 = 0

# Eighth codec.  0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P458 = 0

########################################################################
# SIP Account 3 Settings
########################################################################

# Account Active (In Use). 0 - no, 1 - yes
P501 = 0

# Account Name
P517 =

# SIP Server
P502 =

# Outbound Proxy Server
P503 =

# SIP User ID
P504 =

# Authenticate ID
P505 =

# Authenticate Password
P506 =

# Display Name (John Doe)
P507 =

# Use DNS SRV. 0 - No, 1 - Yes.
P508 = 0

# User ID is phone. "user=phone". 0 - no, 1 - yes
P509 = 0

# SIP Registration. 0 - no, 1 - yes
P510 = 1

# Unregister on Reboot. 0 - no, 1 - yes
P511= 0

# Register Expiration (in minutes. default 1 hour, max 45 days)
P512 = 60

# SIP Local port (default 5064)
P513 = 5064

# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)
# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default 100.
P540 = 100

# SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses.
# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 400.
P541 = 400

# NAT Traversal. 0 - yes, 1 - no, 2 - No, but send keep-alive
P514 = 1

# Subscribe MWI. (Whether or not send SUBSCRIBE for Message Waiting Indication) 0 - no, 1 - yes
P515 = 0

# Proxy Require
P518 =

# Voice Mail UserID (User ID/extension for 3rd party voice mail system)
P526 =
 
# Send DTMF method. 0 - in audio, 1 - via RTP, 2 - via SIP INFO
P516 = 0

# Early Dial. 0 - no, 1 - yes
P522 = 0

# Dial Plan Prefix
P519 =

# Enable Call Features. 0 - no, 1 - yes.
P520 = 1

# Disable Missed-Call (Missed calls will not be logged if set to Yes). 0 - no, 1 - yes
P542 = 0

# Default Session Expires (in seconds. default 180 seconds. Allowed value: 90-65535)
P534 = 180

# Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260)
P527 = 90

# Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes
P528 =

# Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes
P529 =

# Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes
P530 =

# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes
P531 =

# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS
P532 = 0

# UAS Specify Refresher. 1 - UAC, 2 - UAS
P533 = 1

# Enable 100rel. 0 - no, 1 - yes
P535 = 0

# Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2
# 3 - custom ring tone 3.
P523 = 0

# Send Anonymous
P521 =

# Auto Answer. 0 - no, 1 - yes.
P525 = 0
 
# Allow Auto Answer by Call-Info. 0 - no, 1 - yes
P538 = 0

# Turn off speaker on remote disconnect. 0 - no, 1 - yes
P539 = 0

# Special Feature.    100 - Standard, 101 - Nortel MCS.
P524 = 100

#-----------------------------------------------------------------------------
# Codec/Voice Quality settings
#-----------------------------------------------------------------------------

# First codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P551 = 0

# Second codec.  0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P552 = 3

# Third codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P553 = 4

# Forth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P554 = 8

# Fifth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P555 = 18

# Sixth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P556 = 0

# Seventh codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P557 = 0

# Eighth codec.  0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P558 = 0

########################################################################
# SIP Account 4 Settings
########################################################################

# Account Active (In Use). 0 - no, 1 - yes
P601 = 0

#Account Name
P617 = 

# SIP Server
P602 =

# Outbound Proxy Server
P603 =

# SIP User ID
P604 =

# Authenticate ID
P605 =

# Authenticate Password
P606 =

# Display Name (John Doe)
P607 =

# Use DNS SRV. 0 - no, 1 - yes.
P608 = 0

# User ID is phone number. "user=phone". 0 - no, 1 - yes
P609 = 0

# SIP Registration. 0 - no, 1 - yes
P610 = 1

# Unregister on Reboot. 0 - no, 1 - yes
P611 = 0

# Register Expiration (in minutes. default 1 hour, max 45 days)
P612 = 60

# SIP Local port (default 5066)
P613 = 5066

# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)
# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default 100.
P640 = 100

# SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses.
# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 400.
P641 = 400

# NAT Traversal. 0 - yes, 1 - no, 2 - No, but send keep-alive
P614 = 1

# Subscribe MWI. Whether or not send SUBSCRIBE for Message Waiting Indication.  0 - no, 1 - yes
P615 = 0

# Proxy Require
P618 =

# Voice Mail UserID (User ID/extension for 3rd party voice mail system)
P626 =
 
# Send DTMF method. 0 - in audio, 1 - via RTP, 2 - via SIP INFO
P616 = 0

# Early Dial. 0 - no, 1 - yes
P622 = 0

# Dial Plan Prefix
P619 =

# Enable Call Features. 0 - no, 1 - yes.
P620 = 1

# Disable Missed-Call (Missed calls will not be logged if set to Yes). 0 - no, 1 - yes
P642 = 0

# Default Session Expires (in seconds. default 180 seconds. Allowed value: 90-65535)
P634 =

# Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260)
P627 =

# Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes
P628 =

# Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes
P629 =

# Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes
P630 =

# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes
P631 =

# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS
P632 = 0

# UAS Specify Refresher. 1 - UAC, 2 - UAS
P633 = 1

# Enable 100rel. 0 - no, 1 - yes
P635 = 0

# Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom ring tone 2
# 3 - custom ring tone 3.
P623 = 0

# Send Anonymous. 0 - no, 1 - yes
P621 = 0

# Auto Answer. 0 - no, 1 - yes.
P625 = 0

# Allow Auto Answer by Call-Info. 0 - no, 1 - yes
P638 = 0

# Turn off speaker on remote disconnect. 0 - no, 1 - yes
P639 = 0

# Special Feature.  100 - Standard, 101 - Nortel MCS.
P624 = 100
 
#-----------------------------------------------------------------------------
# Codec/Voice Quality settings
#-----------------------------------------------------------------------------

# First codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P651 = 0

# Second codec.  0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P652 = 3

# Third codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P653 = 4

# Forth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P654 = 8

# Fifth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P655 = 18

# Sixth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P656 = 0

# Seventh codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P657 = 0

# Eighth codec.  0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 - G.722 (wide band), 18 - G.729A/B
P658 = 0

################################################################################
# End User Settings. Please do not edit this section.
################################################################################

# End User Password
#P196 = 123

# DHCP support. 0 - yes, 1 - no
#P8 = 0

# PPPoE support. PPPoE user ID
#P82 =

# PPPoE password
#P83 =

# Host name, DHCP option 12. Max length allowed is 32 bytes.
P146 =

# Domain name, DHCP option 15. Max length allowed is 32 bytes.
P147 =

# Vendor Class ID, DHCP option 60. Max length allowed is 32 bytes.
P148 = 

# IP Address. Ignore if DHCP or PPPoE is used
#P9 = 192
#P10 = 168
#P11 = 0
#P12 = 1

# Subnet mask. Ignore if DHCP or PPPoE is used
#P13 = 255
#P14 = 255
#P15 = 255
#P16 = 0

# Router. Ignore if DHCP or PPPoE is used
#P17 = 192
#P18 = 168
#P19 = 1
#P20 = 1

# Use this DNS server.  (if specified).
#P92 = 192
#P93 = 168
#P94 = 0
#P95 = 2

# DNS 1. Ignore if DHCP or PPPoE is used
#P21 = 192
#P22 = 168
#P23 = 0
#P24 = 1

# DNS 2. Ignore if DHCP or PPPoE is used
#P25 = 0
#P26 = 0
#P27 = 0
#P28 = 0

#--------------------------------------------------------------------------
# End User Multi Purpose Keys
#-------------------------------------------------------------------------- 

# Multi Purpose Key 1 
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P323 =

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4
P301 =

# Name
P302 =

# UserID
P303 =

# Multi Purpose Key 2
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P324 =

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4
P304 =

# Name
P305 =

# UserID
P306 =

# Multi Purpose Key 3
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P325 = 

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4
P307 =

# Name
P308 =

# UserID
P309 =

# Multi Purpose Key 4
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P326 =

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4  
P310 =

# Name
P311 =

# UserID
P312 =

# Multi Purpose Key 5
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P327 = 

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4
P313 =

# Name
P314 =

# UserID
P315 =

# Multi Purpose Key 6
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P328 = 

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4 
P316 =

# Name
P317 =

# UserID
P318 =

# Multi Purpose Key 7
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P329 = 

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4 
P319 =

# Name
P320 =

# UserID
P321 =

#-----------------------------------------------------------------------------
# End User Time settings
#-----------------------------------------------------------------------------

# Time Zone. Offset in minutes to GMT
P64 = 420

# Allow DHCP Option 2 to override Time Zone setting. 0 - No, 1 - Yes.
# When set to Yes(1), it will override the configured Time Zone setting if available. 
P143 = 0

# Daylight Savings Time. 0 - no, 1 - yes
P75 = 0

# LCD Backlight Always On. 0 - no, 1 - yes
P322 = 0

# Time Display Format. 0 - 12 Hour, 1 - 24 Hour
P122 = 0

# Date Display Format. 0 - Year-Month-Day, 1 - Month-Day-Year, 2 - Day-Month-Year
P102 = 0

# Display Clock instead of Date. 0 - no, 1 - yes
P123 = 0

# Device Mode. 0 - Switch, 1 - NAT/Router. Default is 0.
P231 = 0

# WAN side http access.  0 - Disable(default), 1 - Yes.
P190 = 0

# Reply to ICMP on WAN port. 0 - No, 1 - Yes. Unit will not respond to PING from WAN side if set to No.
P189 = 0

#Cloned WAN MAC Address.
#P115 =
#P116 =
#P117 =
#P118 =
#P119 =
#P120 =

#LAN Subnet Mask.  Default is 255.255.255.0.
#P110 = 

#LAN Base/Gateway/Router IP for the LAN port, default is 192.168.2.1.
#P111 = 

#DHCP IP Lease Time, in units of hours, default is 120 hours or 5 days.
#P112 = 120

#DMZ IP.
#P113 =

#-----------------------------------------------------------
# Port Forwarding Settings.
#-----------------------------------------------------------

#############  Choice 1 ####################################
# WAN Port
P150 =
# LAN IP
P158 =
# LAN Port
P166 =
# Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P174 =
#############  Choice 2 ####################################
# WAN Port
P151 =
# LAN IP
P159 =
# LAN Port
P167 =
# Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P175 =
#############  Choice 3 ####################################
# WAN Port
P152 =
# LAN IP
P160 =
# LAN Port
P168 =
# Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P176 =
#############  Choice 4 ####################################
# WAN Port
P153 =
# LAN IP
P161 =
# LAN Port
P169 =
# Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P177 =
#############  Choice 5 ####################################
# WAN Port
P154 =
# LAN IP
P162 =
# LAN Port
P170 =
# Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P178 =
#############  Choice 6 ####################################
# WAN Port
P155 =
# LAN IP
P163 =
# LAN Port
P171 =
# Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P179 =
#############  Choice 7 ####################################
# WAN Port
P156 =
# LAN IP
P164 =
# LAN Port
P172 =
# Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P180 =
#############  Choice 8 ####################################
# WAN Port
P157 = 
# LAN IP
P165 = 
# LAN Port
P173 = 
# Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P181 =

More information about the asterisk-users mailing list