[Asterisk-Users] HELP!!!! Weird TDM2406E unable to bridge all outgoing calls.

[Tzafrir Cohen]

On Wed, Jun 07, 2006 at 02:46:41PM +0800, Anderson Ling wrote:
> Hi all,
> I have TDM2406E with 24FXO ports connecting to 10 POTS line sitting in 
> my office. the out going calls symptom like when called party pickup the 
> phone but the calling party still hearing the ring tone from the IP phone.
> Please light me up. it been many sleepless night by googling around 
> trying to get the right answers.

First off, your post does not include the complete chan_zap
configuration: zapata_auto and zapata_additional are still missing.

Also: what do you see in the CLI as the output of the cmmand 'show
channes' when there is such a call?

> 
> The digium card running on Intel 915G chipset. Below are my zaptel 
> configurations.
> asterisk version: 1.2.9.1
> Zaptel Version: 1.2.6 Echo Canceller: KB1
> # Span 1: WCTDM/0 "Wildcard TDM2400P Prototype Board 1"
> fxsks=1
> fxsks=2
> fxsks=3
> fxsks=4
> fxsks=5
>    |
>    |
> fxsks=21
> fxsks=22
> fxsks=23
> fxsks=24
> 
> # Global data
> loadzone        = us
> defaultzone     = us
> 
> [root#] lspci -vb
> 
> 06:00.0 Ethernet controller: Digium, Inc. Wildcard TDM2400P (rev 11)
>        Subsystem: Digium, Inc. Wildcard TDM2400P
>        Flags: bus master, medium devsel, latency 32, IRQ 3
>        I/O ports at b800
>        Memory at ff520000 (32-bit, non-prefetchable)
>        Expansion ROM at ff500000 [disabled]
>        Capabilities: [c0] Power Management version 2
> 
> [root#] dmesg
> 
> --------snip -----------
> Zapata Telephony Interface Registered on major 196
> Zaptel Version: 1.2.6 Echo Canceller: KB1
> PCI: Found IRQ 3 for device 0000:06:00.0
> PCI Config reg is 02900117
> WCTDM2400P: New Reg: fe590000!
> Detected REG0: 00000100
> Detected REG1: 00007849
> Detected REG2: 0000001d
> (pre) Reg fc is 50000027
> (post) Reg fc is 50000024
> Detected REG2: 0000ffff
> wctdm2400p: reg is a04c0004
> Resetting the modules...
> During Resetting the modules...
> After resetting the modules...
> Port 1: Installed -- AUTO FXO (MALAYSIA mode)
> Port 2: Installed -- AUTO FXO (MALAYSIA mode)
> Port 3: Installed -- AUTO FXO (MALAYSIA mode)
> Port 4: Installed -- AUTO FXO (MALAYSIA mode)
> Port 5: Installed -- AUTO FXO (MALAYSIA mode)
> Port 6: Installed -- AUTO FXO (MALAYSIA mode)
> Port 7: Installed -- AUTO FXO (MALAYSIA mode)
> Port 8: Installed -- AUTO FXO (MALAYSIA mode)
> Port 9: Installed -- AUTO FXO (MALAYSIA mode)
> Port 10: Installed -- AUTO FXO (MALAYSIA mode)
> Port 11: Installed -- AUTO FXO (MALAYSIA mode)
> Port 12: Installed -- AUTO FXO (MALAYSIA mode)
> Port 13: Installed -- AUTO FXO (MALAYSIA mode)
> Port 14: Installed -- AUTO FXO (MALAYSIA mode)
> Port 15: Installed -- AUTO FXO (MALAYSIA mode)
> Port 16: Installed -- AUTO FXO (MALAYSIA mode)
> Port 17: Installed -- AUTO FXO (MALAYSIA mode)
> Port 18: Installed -- AUTO FXO (MALAYSIA mode)
> Port 19: Installed -- AUTO FXO (MALAYSIA mode)
> Port 20: Installed -- AUTO FXO (MALAYSIA mode)
> Port 21: Installed -- AUTO FXO (MALAYSIA mode)
> Port 22: Installed -- AUTO FXO (MALAYSIA mode)
> Port 23: Installed -- AUTO FXO (MALAYSIA mode)
> Port 24: Installed -- AUTO FXO (MALAYSIA mode)
> VPM Revision: 01
> VPM: U-law mode
> VPM: DTMF threshold set to 1250
> VPM: Present and operational (Rev B)
> Found a Wildcard TDM: Wildcard TDM2400P Prototype (24 modules)
> Registered tone zone 0 (United States / North America)
> ----------- snip ---------------
> 
> [root]# cat zapata.conf
> [trunkgroups]
> [channels]
> language=en
> context=from-zaptel
> signalling=fxs_ks
> rxwink=300              ; Atlas seems to use long (250ms) winks
> ;
> ; Whether or not to do distinctive ring detection on FXO lines
> ;
> ;usedistinctiveringdetection=yes
> 
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=no
> echotraining=800
> rxgain=0.0
> txgain=0.0
> group=0
> callgroup=1
> pickupgroup=1
> immediate=no
> useincomingcalleridonzaptransfer=yes
> busycount=4
> callprogress = yes
> 
> ;faxdetect=both
> ;faxdetect=incoming
> ;faxdetect=outgoing
> ;faxdetect=no
> 
> ;Include genzaptelconf configs
> #include zapata-auto.conf
> 
> group=1
> 
> ;Include AMP configs
> #include zapata_additional.conf
> 
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 

-- 
Tzafrir Cohen      sip:tzafrir at local.xorcom.com
icq#16849755       iax:tzafrir at local.xorcom.com
+972-50-7952406           
tzafrir.cohen at xorcom.com  http://www.xorcom.com