[Asterisk-Users] Vonage and FXO

[Padmanaban Balasubramaniam]

I got the generic clone version of FXO from ebay. The AT-320 phones also
from ebay. 

Paddu

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Curt Shaffer
Sent: Tuesday, June 06, 2006 1:21 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Vonage and FXO

Sorry, I guess that would help! I was using an X100P so I am sure that was a
large part of the problem.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Paul
Sent: Tuesday, June 06, 2006 1:38 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Vonage and FXO

It would be helpful if responders would tell us what FXO hardware they
are using and which vonage ATA device it connects to.

Padmanaban Balasubramaniam wrote:

>I am using it with my A at H setup. I did not face any issues with echo, but
>once in a while, the trunk does NOT get disconnected even after the call
has
>been completed. So I had to manually plug the phone cable out from FXO and
>plug it back again. But I think that's something to do with my version of
>FXO drivers.
>
>Otherwise it works for me.
>
>Paddu
>
>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Curt Shaffer
>Sent: Tuesday, June 06, 2006 10:37 AM
>To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
>Subject: RE: [Asterisk-Users] Vonage and FXO
>
>I used a scenario like this before but I always ran into intermittent echo
>issues that were just not worth the hassle for me so I switched to a sole
IP
>origination and termination service. 
>
>Just my personal experience!
>
>HTH
>
>Curt
>
>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of mustardman29
>Sent: Tuesday, June 06, 2006 12:22 PM
>To: asterisk-users at lists.digium.com
>Subject: [Asterisk-Users] Vonage and FXO
>
> 
>Is anyone using Vonage on an FXO port in Asterisk?  How well does it work?
>Specifically, any echo/delay problems?
>
>Second part, I am assuming it is possible to separate fxo ports for least
>cost routing correct?  In other words, I would like the routing to be such
>that any local or 1-800# dials fxo ports 1-4 which is a normal 4 line
analog
>PSTN connection.  Any long distance call will try to dial fxo port 5
(Vonage
>ATA) first and if it's used then use fxo ports 1-4.  Is this easy to do in
>FreePBX?
>
>I know I can get a Vonage softphone account and not use an ATA/FXO port.  I
>want to know if I can do it with an ATA/FXO.
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>Asterisk-Users mailing list
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>Asterisk-Users mailing list
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>Asterisk-Users mailing list
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>  
>

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users