[Asterisk-Users] HELP!!!! Weird TDM2406E unable to bridge all outgoing calls.

[Anderson Ling]

Hi all,
I have TDM2406E with 24FXO ports connecting to 10 POTS line sitting in 
my office. the out going calls symptom like when called party pickup the 
phone but the calling party still hearing the ring tone from the IP phone.
Please light me up. it been many sleepless night by googling around 
trying to get the right answers.

The digium card running on Intel 915G chipset. Below are my zaptel 
configurations.
asterisk version: 1.2.9.1
Zaptel Version: 1.2.6 Echo Canceller: KB1
# Span 1: WCTDM/0 "Wildcard TDM2400P Prototype Board 1"
fxsks=1
fxsks=2
fxsks=3
fxsks=4
fxsks=5
    |
    |
fxsks=21
fxsks=22
fxsks=23
fxsks=24

# Global data
loadzone        = us
defaultzone     = us

[root#] lspci -vb

06:00.0 Ethernet controller: Digium, Inc. Wildcard TDM2400P (rev 11)
        Subsystem: Digium, Inc. Wildcard TDM2400P
        Flags: bus master, medium devsel, latency 32, IRQ 3
        I/O ports at b800
        Memory at ff520000 (32-bit, non-prefetchable)
        Expansion ROM at ff500000 [disabled]
        Capabilities: [c0] Power Management version 2

[root#] dmesg

--------snip -----------
Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.2.6 Echo Canceller: KB1
PCI: Found IRQ 3 for device 0000:06:00.0
PCI Config reg is 02900117
WCTDM2400P: New Reg: fe590000!
Detected REG0: 00000100
Detected REG1: 00007849
Detected REG2: 0000001d
(pre) Reg fc is 50000027
(post) Reg fc is 50000024
Detected REG2: 0000ffff
wctdm2400p: reg is a04c0004
Resetting the modules...
During Resetting the modules...
After resetting the modules...
Port 1: Installed -- AUTO FXO (MALAYSIA mode)
Port 2: Installed -- AUTO FXO (MALAYSIA mode)
Port 3: Installed -- AUTO FXO (MALAYSIA mode)
Port 4: Installed -- AUTO FXO (MALAYSIA mode)
Port 5: Installed -- AUTO FXO (MALAYSIA mode)
Port 6: Installed -- AUTO FXO (MALAYSIA mode)
Port 7: Installed -- AUTO FXO (MALAYSIA mode)
Port 8: Installed -- AUTO FXO (MALAYSIA mode)
Port 9: Installed -- AUTO FXO (MALAYSIA mode)
Port 10: Installed -- AUTO FXO (MALAYSIA mode)
Port 11: Installed -- AUTO FXO (MALAYSIA mode)
Port 12: Installed -- AUTO FXO (MALAYSIA mode)
Port 13: Installed -- AUTO FXO (MALAYSIA mode)
Port 14: Installed -- AUTO FXO (MALAYSIA mode)
Port 15: Installed -- AUTO FXO (MALAYSIA mode)
Port 16: Installed -- AUTO FXO (MALAYSIA mode)
Port 17: Installed -- AUTO FXO (MALAYSIA mode)
Port 18: Installed -- AUTO FXO (MALAYSIA mode)
Port 19: Installed -- AUTO FXO (MALAYSIA mode)
Port 20: Installed -- AUTO FXO (MALAYSIA mode)
Port 21: Installed -- AUTO FXO (MALAYSIA mode)
Port 22: Installed -- AUTO FXO (MALAYSIA mode)
Port 23: Installed -- AUTO FXO (MALAYSIA mode)
Port 24: Installed -- AUTO FXO (MALAYSIA mode)
VPM Revision: 01
VPM: U-law mode
VPM: DTMF threshold set to 1250
VPM: Present and operational (Rev B)
Found a Wildcard TDM: Wildcard TDM2400P Prototype (24 modules)
Registered tone zone 0 (United States / North America)
----------- snip ---------------

[root]# cat zapata.conf
[trunkgroups]
[channels]
language=en
context=from-zaptel
signalling=fxs_ks
rxwink=300              ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes

usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
useincomingcalleridonzaptransfer=yes
busycount=4
callprogress = yes

;faxdetect=both
;faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no

;Include genzaptelconf configs
#include zapata-auto.conf

group=1

;Include AMP configs
#include zapata_additional.conf