[Asterisk-Users] Asterisk and SATA Raid 1

[mustardman29]

So nobody has any problems with SATA hard drives and newer 
FreePBX/Asterisk versions with Digium TDM400, TDM2400 or 
Sangoma A200 cards?  
> 
> > -----Original Message-----
> > From: Julian J. M. [mailto:julianjm at gmail.com]
> > Sent: Monday, June 05, 2006 7:37 AM
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > Subject: Re: [Asterisk-Users] Asterisk and SATA Raid 1
> > 
> > Hi,
> > 
> > I also remember reading that.. but i'm not sure if it was Digium's 
> > word ;) It had to do with some SCSI and SATA controllers taking 
> > control of the PCI bus for too much time, and causing 
> frame-slips or 
> > IRQ losses on TDM hardware.
> > 
> > Julian.
> > 
> > On 6/5/06, Kevin P. Fleming <kpfleming at digium.com> wrote:
> > >
> > > ----- mustardman29 <mustardman29 at hotmail.com> wrote:
> > >
> > > > I know that Digium and FreePBX were not recommending it
> > awhile back
> > > > but I think that was based on 2.4 Kernel and Digium
> > hardware issues.  
> > > > I am
> > >
> > > Can you give me a pointer to any place where Digium
> > recommended against using hardware RAID cards? I can't imagine that 
> > being an issue for Asterisk or any of our hardware.
> > >
> > > --
> > > Kevin P. Fleming
> > > Senior Software Engineer
> > > Digium, Inc.
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com --
> > >
> > > Asterisk-Users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > 
> >