[Asterisk-Users] ADIT 600 <=> Asterisk Help

[C F]

The Adit is realy simple as all it is is a bridge, so you have one
interface that is virtualy cross connected to another interface within
the Adit.
If you want to use the Adit with asterisk you can put the cards into
the Adit (usualy FXS and/or FXO cards) and then connect the Adit to
Asterisk, in most cases the Adit is connected to Asterisk using a T1
cable that is connected to a T1 card (like from Digium), however you
can also use the CMG card from the Adit, but keep in mind that the CMG
card only works with FXS cards and not with FXO.


On 6/3/06, Bart Fisher <bhfisher at icpage.com> wrote:
> I've been reading the Google searches trying to understand how to tie
> together Adit 600 to Asterisk to provide 2 way service.  I'm about blind
> from reading.
>
> I assume, the answer is using MGCP between the boxes.  However, the examples
> I found don't really explain fully enough to know how to modify examples to
> work for me.
>
> I'll have in the ADIT with T1's. There is a CMG and FXS card installed -
> later I'd like to add a FXO card.
>
> The goal would be able to route calls to and from ADIT from the T1's to
> Asterisk and route some
> Asterisk extensions to the FXS card.
>
> If you have done this, would you mind posting or sending me your mgcp.conf
> with some remarks explaining how & why and a your CMG config?
>
> Thanks for the time
>
> Bart
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>