[Asterisk-Users] BN8S0 Installation problem - 0 devices registrered

[Christophorus Laube]

Do you still have the precompiled kernel installed? Try to boot to it. Install 
kernel sources and try to rerun the install-misdn-mqueue script. This is 
doing the needed stuff for you. Maybe the recompilation of your kernel caused 
the problem. I have installed three systems with misdn the last two months 
(two of them with the BN8S0) and I did not have problems in that with the 
vendor delivered precompiled kernel. To not need to recompile the kernel is 
one of the reasons they build the misdn in a kernel and a user space part. 
You can also contact beronet in order to get some support. They support their 
cards until they are correctly recognized in asterisk.

Cheers
> thanks to your reply
>
> i've also tried to use install-misdn-mqueue but:
>
> root at testing_asterisk:/usr/src/install-misdn-mqueue# /etc/init.d/misdn-init
> scan [OK] found the following devices:
> card=1,0x8
> [ii] run "/etc/init.d/misdn-init config" to store this information to
> /etc/misdn-init.conf
>
> as you can see, the scan finish succesfully, but if try to start misd i
> get: root at testing_asterisk:/usr/src/install-misdn-mqueue#
> /etc/init.d/misdn-init start
> FATAL: Module capi not found.
> FATAL: Error inserting mISDN_capi
> (/lib/modules/2.6.16.18/extra/mISDN_capi.ko): Unknown symbol in
> module, or unknown parameter (see dmesg)
> -----------------------------------------
>  Loading module(s) for your misdn-cards:
> -----------------------------------------
> modprobe --ignore-install hfcmulti type=0x8
> protocol=0x2,0x2,0x2,0x2,0x2,0x2,0x2,0x2
> layermask=0xf,0xf,0xf,0xf,0xf,0xf,0xf,0xf poll=128 debug=0
>
>
> and dmesg:
> Modular ISDN Stack core $Revision: 1.34 $
> mISDNd: kernel daemon started
> ISDN L1 driver version 1.16
> ISDN L2 driver version 1.27
> mISDN: DSS1 Rev. 1.38
> mISDN_dsp: Audio DSP  Rev. 1.17 (debug=0x0) EchoCancellor MG2
> mISDN_dsp: DSP clocks every 64 samples. This equals 2 jiffies.
> mISDN_capi: Unknown symbol capi_cmd2str
> mISDN_capi: Unknown symbol capi_cmsg_header
> mISDN_capi: Unknown symbol detach_capi_ctr
> mISDN_capi: Unknown symbol capi_cmsg2message
> mISDN_capi: Unknown symbol capi_ctr_reseted
> mISDN_capi: Unknown symbol capi_ctr_ready
> mISDN_capi: Unknown symbol capi_message2cmsg
> mISDN_capi: Unknown symbol capi_ctr_handle_message
> mISDN_capi: Unknown symbol attach_capi_ctr
> mISDNd: test event done
> mISDN: HFC-multi driver Rev. 1.41
> 0 devices registered
>
> finally, if i try to start asterisk:
>
>  [chan_misdn.so] => (Channel driver for mISDN Support (Bri/Pri))
> mISDN_close: fid(18) isize(131072) inbuf(0xb7580008) irp(0xb7580008)
> iend(0xb7580008)
> Jun  3 08:42:31 ERROR[8296]: chan_misdn.c:3775 load_module: Unable to
> initialize mISDN
> Jun  3 08:42:31 WARNING[8296]: loader.c:414 __load_resource:
> chan_misdn.so: load_module failed, returning -1
> Jun  3 08:42:31 WARNING[8296]: loader.c:554 load_modules: Loading
> module chan_misdn.so failed!
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users