[Asterisk-Users] Asterisk: T1 hunt group setup

[John Bigelow]

If I understand this correctly, you want to be able to accept 
simultaneous calls to the single DID (555) 222 0001. There is no reason 
to "roll over" to another DID if there is already a call on that DID. 
You can receive as many calls to a single DID for as many channels you 
have on your T1.

-John

Andrei (MPI) wrote:
> Hello everyone,
>
> I'm sure someone had an experience arranging hunt-group setup for 
> incoming calls on T1 PRI channels of Digium TE110P card.
>
> For instance, I have main DID channel associated with number (555) 222 
> 0001.
> And I have whole bunch of other DID channels on same T1 card like 
> (555) 222 0090,  (555) 222 0091, (555) 222 0093.
>
> My goal is when a call comes to the main number which is (555) 222 
> 0001, to have it roll over to the next available T1 channel.
> Or give busy signal to the caller if all channels are busy. To have 
> one main number for all calls.
>
> I thought this had to be done in Central Office for our T1 connection 
> (like DID setup), and T1 provider keeps telling me that
> this will be function of our phone system (Asterisk).
>
> So, do I literally have to implement some sort of logic in 
> extensions.conf, that would allow receive call on main channel and 
> roll it over to a next available DID? And keep main DID number free 
> all the time?
>
> Please help!!
>
> Andrei (MPI)
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users