[Asterisk-Users] Asterisk: T1 hunt group setup

[Jerry Jones]

If you have a PRI to a telco, they probably only have a single trunk  
group with 23 channels in it for your connection.

Any calls to any of your numbers may come to you on any channel.  
Channels are not dedicated to individual numbers.

In other words the first call may come in on channel 1, the second on  
channel 2. They may or may not have dialed the same number.

Or perhaps I am misunderstanding something in your setup....


On Jun 1, 2006, at 10:47 AM, Andrei (MPI) wrote:

> Hello everyone,
>
> I'm sure someone had an experience arranging hunt-group setup for  
> incoming calls on T1 PRI channels of Digium TE110P card.
>
> For instance, I have main DID channel associated with number (555)  
> 222 0001.
> And I have whole bunch of other DID channels on same T1 card like  
> (555) 222 0090,  (555) 222 0091, (555) 222 0093.
>
> My goal is when a call comes to the main number which is (555) 222  
> 0001, to have it roll over to the next available T1 channel.
> Or give busy signal to the caller if all channels are busy. To have  
> one main number for all calls.
>
> I thought this had to be done in Central Office for our T1  
> connection (like DID setup), and T1 provider keeps telling me that
> this will be function of our phone system (Asterisk).
>
> So, do I literally have to implement some sort of logic in  
> extensions.conf, that would allow receive call on main channel and  
> roll it over to a next available DID? And keep main DID number free  
> all the time?
>
> Please help!!
>
> Andrei (MPI)
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users