[asterisk-users] Re: Re: Re: TE420P/TE415P?

[Matt Florell]

Yes, that is very confusing :)

Is there no way to throw a timer chip in there(I suppose it's way too
late to put that suggestion forward now)?

There are many instalations that need a zaptel timer to use meetme
with no telco lines and this will be the first Digium zaptel card made
that does not provide such a timer.

Even if it was just a fake X100P-type single FXO channel that is not
used, it would still be a wonderful addition(and relatively cheap) to
fully utilize Asterisk with only VOIP channels. Otherwise there are a
lot of installations that will still have to have that extra X100P
card in their machines.

Thanks,

MATT---


On 7/31/06, Kevin P. Fleming <kpfleming at digium.com> wrote:
> ----- Matt Florell <astmattf at gmail.com> wrote:
> > Will this card serve as a zaptel timer?
> >
> > It's kind of hard to imagine that it wouldn't, I just want to make
> > sure since this is the first Digium card with no telco interfaces.
>
> No, the transcoder card is not a Zaptel interface, so it does not provide any 'spans', and thus cannot provide timing. The interface to it is part of Zaptel, though, just to keep everyone confused :-)
>
> --
> Kevin P. Fleming
> Senior Software Engineer
> Digium, Inc.
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>