[asterisk-users] Disable native bridge between two zap trunks

[Vincenzo VD. Di Donna]

Hi,

I have problems with two trunks, ZAP3 and ZAP4. ZAP4 is connected to PSTN 
line while ZAP3 is connected to analogical switchboard.


The system is able to redirect calls from ZAP4 to ZAP3,  through an IVR, 
but, hanging up doesn't work .


This is the CLI report where you can see, at the end, the attempt of a 
native bridge instead of the call hang up.





    -- Playing 'custom/aa_10' (language 'it')

............

    -- Executing Macro("Zap/4-1", "dialout-trunk|1|45|") in new stack

.............

    -- Executing AGI("Zap/4-1", 
"recordingcheck|20060720-151752|1153401458.34") in new stack

    -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck

  recordingcheck|20060720-151752|1153401458.34: Outbound recording not 
enabled

    -- AGI Script recordingcheck completed, returning 0

    -- Executing NoOp("Zap/4-1", "No recording needed") in new stack

    -- Executing Macro("Zap/4-1", "outbound-callerid|1") in new stack

    -- Executing DBget("Zap/4-1", "USEROUTCID=AMPUSER//outboundcid") in new 
stack

    -- DBget: varname=USEROUTCID, family=AMPUSER, key=/outboundcid

    -- DBget: Value not found in database.

    -- Executing GotoIf("Zap/4-1", "1?4") in new stack

    -- Goto (macro-outbound-callerid,s,4)

    -- Executing GotoIf("Zap/4-1", "1?6") in new stack

    -- Goto (macro-outbound-callerid,s,6)

    -- Executing NoOp("Zap/4-1", "CallerID set to ") in new stack

    -- Executing SetGroup("Zap/4-1", "OUT_1") in new stack

    -- Executing GotoIf("Zap/4-1", "0?108") in new stack

    -- Executing SetVar("Zap/4-1", "DIAL_NUMBER=45") in new stack

    -- Executing SetVar("Zap/4-1", "DIAL_TRUNK=1") in new stack

    -- Executing AGI("Zap/4-1", "fixlocalprefix") in new stack

    -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix

    -- AGI Script fixlocalprefix completed, returning 0

    -- Executing SetVar("Zap/4-1", "OUTNUM=45") in new stack

    -- Executing Cut("Zap/4-1", "custom=OUT_1|:|1") in new stack

    -- Executing GotoIf("Zap/4-1", "0?16") in new stack

    -- Executing Dial("Zap/4-1", "ZAP/3/45") in new stack

    -- Called 3/45

    -- Zap/3-1 answered Zap/4-1

    -- Attempting native bridge of Zap/4-1 and Zap/3-1



Thanks in advance.









----- Original Message ----- 
From: "Tzafrir Cohen" <tzafrir.cohen at xorcom.com>
To: <asterisk-users at lists.digium.com>
Sent: Monday, July 31, 2006 8:48 AM
Subject: Re: [asterisk-users] Disable native bridge between two zap trunks


> On Mon, Jul 31, 2006 at 08:38:45AM +0200, Vincenzo VD. Di Donna wrote:
>> Hi,
>> I'm using AAH version 2.6 with Diguim TDM400P.
>> How can I disable native bridge between two zap trunks?
>> Any help or suggestion is welcome
>> Thank's
>>
>> PS: I posted a similar question last week without answers.
>
> Which brings up the obvious question: why would you like to disable the
> native bridging?
>
> -- 
> Tzafrir Cohen         sip:tzafrir at local.xorcom.com
> icq#16849755          iax:tzafrir at local.xorcom.com
> +972-50-7952406          jabber:tzafrir at jabber.org
> tzafrir.cohen at xorcom.com     http://www.xorcom.com
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users