[Asterisk-Users] Libpri + Zaptel + Asterisk polycom_acd_functionserror message

[Dean at INKnBITs]

Is this correct:

zaptel: make clean; make; make install
asterisk: make clean; make; make install

Will this recompile everything needed? I tried, but the meetme app still
does not get compiled (and no music)


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of BJ Weschke
Sent: 10 July 2006 13:03
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Libpri + Zaptel + Asterisk
polycom_acd_functionserror message


 You may need to recompile now that you've got zaptel/ztdummy
installed so that your install sees that the proper zaptel exists now.

On 7/10/06, Dean @ INKnBITs <dean.bath at inknbits.co.uk> wrote:
> After using the trunk versions as below, it all compiled ok, and the
polycom
> acd is working great, but the music on hold and meetme will now work. I do
> not have any digium cards, is the ztdummy installed with the truck
version?
> Or is there any thing I need to change?
>
> Thanks,
> Dean.
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of BJ Weschke
> Sent: 04 July 2006 15:07
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Libpri + Zaptel + Asterisk
> polycom_acd_functionserror message
>
>
> On 7/4/06, Dean @ INKnBITs <dean.bath at inknbits.co.uk> wrote:
> > I have installed libpri 1.2.3 and zaptel 1.2.6 (with make clean, make,
> make
> > install), there was no errors.
> >
> > I used svn to get the polycom_acd_functions asterisk branch release
30432,
> I
> > have to run make 3 times as it as it comes up with making opts re-run
> make.
> > It then completes and I run make install, and get the following error
> > message.
> >
> >
> > chan_zap.c:73:2: #error "You need newer libpri"
> > chan_zap.c:113:2: #error "Your zaptel is too old. please update"
> >
> >
> >
> > Does anybody know why I'm getting these error message, as I have the
> newest
> > versions of both?
> >
>
>  You need the /trunk versions of libpri and zaptel instead of the
> branches/1.2 releases.
>
>
> --
> Bird's The Word Technologies, Inc.
> http://www.btwtech.com/
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>


--
Bird's The Word Technologies, Inc.
http://www.btwtech.com/
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users