[Asterisk-Users] Sangoma A200 hangup detection

[Mike Dent]

Just wondered if you fixed your hangup problem?
Mike


On 6/29/06, El Flynn <el_flynn at lanvik-icu.com> wrote:
> chan (Alpha Trilogies Networks) wrote:
> > Hi,
> > Does some one experience the Sangoma A20X-ec series card that cant detect
> > the hangup tone?
>
> <snip>
> >
> > [channels]
> > context = from-pstn3
> > switchtype = national
> > usecallerid=yes
> > hidecallerid=no
> > transfer=yes
> > echocancel = yes
> > echocancelwhenbridged = yes
> > echotrainning = yes
> > busydetect=yes
> > busycount=1
> > callprogress=yes
> > relaxdtmf=yes
> > rxgain =-2.5
> > txgain =-2.5
> > signalling=fxs_ks
> > group=1
> > channel=>3-4
> >
> > Any advice?
> >
>
> A couple of things:
>
> 1. The switchtype setting is only for PRI lines.
> 2. Try setting callprogress=no, call progress analysis is supposedly only valid
> in the US.
> 3. Tune your gain settings until you get an optimal signal level -- google the
> list or the Wiki, it's quite thoroughly documented.
>
> Flynn
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>