[Asterisk-Users] Re: Gain adjustment

[James Ronald]

> On Tue, Jan 31, 2006 at 08:44:18AM -0600, Rich Adamson wrote:
>>
>>
>> > When adjusting the rxgain and txgain in Asterisk 1.2.1 do I need to 
>> > restart Asterisk or
>> is it enough to just reload
>> > Asterisk in order to apply the new setting?
>> >
>>
>> Need to stop asterisk and restart it. A reload will not take the new 
>> setting
>> into consideration. There is no need to stop/start the zaptel drivers, 
>> just
>> asterisk itself.
>
> Actually there is a restart in chan_zap of Asterisk 1.2. And zapata.conf
> is of chan_zap. However I'm not sure exactly how much of those changes
> do apply on repload.
>
Anyone know if the gain can be adjusted on a channel basis?  I have a 
TDM412B card (1-FSX, 2-FXO) and adjusting the gain in zapata.conf affects 
all three.  Is there a different syntax?  This is a problem for my as my FSX 
need no gain and doing so causes problems and my need a gain set to about 15 
else you can't barely hear the caller and VM is worse.
 Thanks JR.