[Asterisk-Users] TDM400P FXO port problem.

[Rich Adamson]

> I have a digium TDM400P with 1 FXO and 1 FXS port. I have a standard analog
> phone connected to the FXO port and place calls to the PTSN phone line. The
> analog trunk is accessed via the standard "9" and area code (if needed) and
> of course the phone number. The error is as follows. I dial 9,866-XXX-XXXX
> some other number is dialed such. This occurs with toll free as well as
> local and or long distance numbers. My SIP phones work well as do any
> softphones. I know this must be a cockpit problem so any assistance grealy
> appreciated.

I assume the above is a typo; analog phones connect to the FXS port, not FXO.
(The analog phone wouldn't function at all if it was plugged into a FXO port.)

There really isn't anyway to guess at your dialing problem without you 
providing copy/paste portions of your configs. It sort of sounds like
your analog phone is dropping into an extensions.conf context that is
different from what your sip phones are using.

Paste the appropriate sections of zapata.conf and extensions.conf so we
can see what you're doing.