[Asterisk-Users] Spa3k and ISDN

[Chris Stenton]

What caller id method is used in spain? Is it before or after the ring.

If you can set the ISDN termination box for UK caller id then the ID is sent
before the first ring.

on the sipura thats ETSI FSK with PR(UK)


Chris

----- Original Message ----- 
From: "Manuel Dominguez" <manuelmovil at teleline.es>
To: <asterisk-users at lists.digium.com>
Sent: Friday, January 27, 2006 11:29 AM
Subject: [Asterisk-Users] Spa3k and ISDN


> Hello all,
>
> I have an ISDN termination box (TR1) that converts ISDN(Bri) to 2 normal
> analogue lines. The same number is assigned to these lines. These lines 
> are
> connected to 2 spa3k registered to my asterisk box.
>
> When calls arrive, TR1 try to pass call to the first spa. If spa not takes
> the call immediately then try to pass to the other spa. The only
> configuration I found works is to put the parameter 'PSTN Answer Delay' to 
> 0
> in each spa.  The problem is Call CID. I suppose the problem is that
> Asterisk not sees the CID because the spa takes several seconds to know. 
> In
> the Spa status page appears the CID but never in the asterisk box or
> extensions.
>
> If somebody can help me it would be appreciate,
>
> Regards,
>
>
> Manuel
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>