[Asterisk-Users] * point to point t1 solution?

[Damon Estep]

Lets put the TDMoE aside for a minute...

The same trunking could be achieved with SIP or IAX, could it not (with higher latency)?

The rest of the question remains - is there a way to get asterisk to output, bit for bit, on a t1 interface, the same data that is input on a remote asterisk box t1 interface - using any trunking protocol.

This is what would be required to truly emulate a "signaling un-aware" point to point t1 like one that you would get from a telco if you ordered a point to point esf/b8zs t1 from A location to Z location.

Pure circuit emulation - not ISDN/CAS/E&M signaled voice.

Does that clarify the question at all?



> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Jean-Michel Hiver
> Sent: Thursday, January 26, 2006 6:53 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] * point to point t1 solution?
> 
> Damon Estep a écrit :
> 
> >TDMoE would allow a T1 like connection only over the local Ethernet
> segment, since it is not an IP technology it can not be router across ip
> networks.
> >
> >
> 
> You could use OpenVPN to create a virtual tap0 interface over IP, and
> bridge that with your current ethX network.
> 
> Cheers,
> Jean-Michel.
> 
> --
> Jean-Michel Hiver - http://ykoz.net/
> Découvrez la Réunion des Technologies IP & Telecom
> TEL: +262 (0)262 55 03 98 - RCS 434 273 330 SAINT PIERRE
> 
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users