[Asterisk-Users] * point to point t1 solution?

[Jean-Michel Hiver]

Damon Estep a écrit :

> Can anyone point me to a reference or sample config for bypassing a 
> nailed up (point to point) t1 between two PBXs with asterisk and a 
> pair of t1 cards?
>
>  
>
> Right now I have 2 Nortel norstars connected to each other via a 
> leased line t1. I also have a solid 10mbps low latency microwave link 
> between the 2 sites.
>
You probably need a couple of T1 cards, and some paid consulting to get 
it working (I've never done it myself but that's how I would do it if I 
was in a hurry)
 

> My goal is to run an asterisk box at each end with a t1 card and 
> Ethernet card to act as a TDM<>SIP gateway to bypass the nailed T1 in 
> a relatively dumb configuration, with the goal of migrating off of the 
> norstars eventually.
>
If it's a point to point Asterisk <-> Asterisk configuration, why use 
SIP rather than IAX? IAX configuration is very easy, so once you get the 
norstar <-> asterisk link up it'll be a piece of cake.

Cheers,
Jean-Michel.

-- 
Jean-Michel Hiver - http://ykoz.net/
Découvrez la Réunion des Technologies IP & Telecom
TEL: +262 (0)262 55 03 98 - RCS 434 273 330 SAINT PIERRE