[Asterisk-Users] Nortel Meridian Opt 81C and PRI
Schochet, Wes
wes.schochet at selectcomfort.com
Wed Jan 25 12:39:38 MST 2006
I believe it's now called 3.0...
REQ iss
VERSION 2521
RELEASE 3
ISSUE 00 + DepList x210300_cpt
Yup 3.0
-----Original Message-----
From: Greg Camp [mailto:Greg.Camp at ExcellSvcs.com]
Sent: Wednesday, January 25, 2006 11:54 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Nortel Meridian Opt 81C and PRI
We had been using DTN, but when DIP worked on the Option 11 we gave it a
try. (We were following the instructions in asterisk-meridian-a1.pdf, and
it didn't specify to use DTN on CLS so we were just taking the
defaults.)
What release is your 61?
Thanks,
Greg
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Schochet, Wes
> Sent: Wednesday, January 25, 2006 10:35 AM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: RE: [Asterisk-Users] Nortel Meridian Opt 81C and PRI
>
> Your trunk is set for pulse, should probably be set for tone - that
may
> help?
>
> CLS DTN instead of the (archaic default) DIP
>
> -----Original Message-----
> From: Greg Camp [mailto:Greg.Camp at ExcellSvcs.com]
> Sent: Wednesday, January 25, 2006 8:56 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] Nortel Meridian Opt 81C and PRI
>
> This is on an MSDL card. What is your individual trunk member config?
> Our zapata.conf / zaptel.conf are basically the same. No, they are
> exactly the same....
>
> Interesting side note: we located an old Option 11 (release 19 with a
> cartridge!) and were able to get the below config to work just fine.
> Obviously there are some subtle differences since there is no MSDL on
an
> Option 11, but other than the missing prompts due to an older OS on
the
> Nortel, the config is the same. We don't really want to leave the
Option
> 11
> running just to support Asterisk.
>
> Do you get name display on your Asterisk phones when someone from the
> Nortel calls? That's one thing that doesn't happen on the Opt11.
> Names do
get
> displayed on the Nortel phone when called from an Asterisk phone,
however.
>
> REQ issp
>
> VERSION 2611
> RELEASE 25
> ISSUE 30 + MDCS01 NA00
>
> PSWV VERSION: PSWV 53
>
> cequ
> DLOP NUM DCH FRM LCMT YALM TRSH
> PRI 088 23 ESF B8S FDL 00
>
> ADAN DCH 88
> CTYP MSDL
> GRP 0
> DNUM 12
> PORT 0
> DES asterisk
> USR PRI
> DCHL 88
> OTBF 32
> PARM RS422 DTE
> DRAT 64KC
> CLOK EXT
> IFC ESS5
> SIDE USR
> CNEG 1
> RLS ID 1
> RCAP ND2
> T200 3
> T203 10
> N200 3
> N201 260
> K 7
>
> TN 088 01
> TYPE TIE
> CDEN SD
> CUST 0
> TRK PRI
> PDCA 1
> PCML MU
> NCOS 0
> RTMB 38 1
> B-CHANNEL SIGNALING
> TGAR 1
> AST NO
> IAPG 0
> CLS UNR DIP CND WTA LPR APN THFD HKD
> P10 VNL
> TKID
> DATE 24 JAN 2006
>
> TYPE RDB
> CUST 00
> ROUT 38
> DES ASTERISK
> TKTP TIE
> NPID_TBL_NUM 0
> ESN NO
> CNVT NO
> SAT NO
> RCLS INT
> DTRK YES
> DGTP PRI
> ISDN YES
> MODE PRA
> IFC ESS5
> SBN NO
> PNI 00000
> SRVC NNSF
> NCNA YES
> NCRD YES
> CHTY BCH
> CTYP UKWN
> INAC NO
> ISAR NO
> CPUB OFF
> DAPC NO
> BCOT 0
> DSEL VOD
> PTYP PRI
> AUTO NO
> DNIS NO
> DCDR NO
> ICOG IAO
> SRCH LIN
> TRMB YES
> STEP
> ACOD 8138
> TCPP NO
> PII NO
> TARG 01
> CLEN 1
> BILN NO
> OABS
> INST
> IDC NO
> DCNO 0 *
> NDNO 0
> DEXT NO
> ANTK
> SIGO STD
> ICIS YES
> TIMR ICF 512
> OGF 512
> EOD 13952
> NRD 10112
> DDL 70
> ODT 4096
> RGV 640
> GRD 896
> SFB 3
> NBS 2048
> NBL 4096
> IENB 5
>
>
> PAGE 002
>
> TFD 0
> DRNG NO
> CDR NO
> MUS NO
> RACD NO
> FRL 0 0
> FRL 1 0
> FRL 2 0
> FRL 3 0
> FRL 4 0
> FRL 5 0
> FRL 6 0
> FRL 7 0
> OHQ NO
> OHQT 00
> CBQ NO
> AUTH NO
> PLEV 2
> ALRM NO
> ART 0
> SGRP 0
> AACR NO
>
> Thanks,
> Greg
>
>
> > -----Original Message-----
> > From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-
> > bounces at lists.digium.com] On Behalf Of Schochet, Wes
> > Sent: Tuesday, January 24, 2006 8:38 PM
> > To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> > Subject: RE: [Asterisk-Users] Nortel Meridian Opt 81C and PRI
> >
> > I have a 61c running steady and reliable. ENLL in 60 will always
> bring up
> > the DCHannel, whether it's disabled in 96 or not. Lets see some M1
> > configs
> > - I'll show you mine if...
> >
> > LD 22
> > REQ prt
> > TYPE cequ
> > <blah blah>
> > DLOP NUM DCH FRM TMDI LCMT YALM TRSH
> > TRK 020 24 ESF NO B8S FDL 00
> > PRI 002 24 ESF NO B8S FDL 00
> > <blah blah>
> > 019 23 ESF NO B8S FDL 00
> > <blah blah>
> >
> > REQ PRT
> > TYPE ADAN DCH 5
> >
> > ADAN DCH 5
> > CTYP MSDL
> > DNUM 10
> > PORT 2
> > DES Asterisk
> > USR PRI
> > DCHL 19
> > OTBF 32
> > PARM RS422 DTE
> > DRAT 64KC
> > CLOK EXT
> > IFC ESS5
> > SIDE USR
> > CNEG 1
> > RLS ID 1
> > RCAP ND2
> > MBGA NO
> > OVLR NO
> > OVLS NO
> > T200 3
> > T203 10
> > N200 3
> > N201 260
> > K 7
> >
> >
> >
> > >ld 21
> > PT1000
> >
> > REQ: PRT
> > TYPE: RDB
> > CUST 0
> > ROUT 19
> >
> > TYPE RDB
> > CUST 00
> > ROUT 19
> > DES ASTERISK
> > TKTP TIE
> > NPID_TBL_NUM 0
> > ESN NO
> > CNVT NO
> > SAT NO
> > RCLS INT
> > VTRK NO
> > DTRK YES
> > BRIP NO
> > DGTP PRI
> > ISDN YES
> > MODE PRA
> > IFC ESS5
> > SBN NO
> > PNI 00000
> > SRVC NNSF
> > NCNA YES
> > NCRD YES
> > CHTY BCH
> > CTYP UKWN
> > INAC NO
> > ISAR NO
> > CPUB OFF
> > DAPC NO
> > BCOT 0
> > DSEL VOD
> > PTYP PRI
> > AUTO NO
> > DNIS NO
> > DCDR NO
> > ICOG IAO
> > SRCH LIN
> > TRMB YES
> > STEP
> > ACOD 2019
> > TCPP NO
> > PII NO
> > TARG 01
> > CLEN 1
> > BILN NO
> > OABS
> > INST
> > IDC NO
> > DCNO 0 *
> > NDNO 0
> > DEXT NO
> > ANTK
> > SIGO STD
> > ICIS YES
> > TIMR ICF 512
> > OGF 512
> > EOD 13952
> > NRD 10112
> > DDL 70
> > ODT 4096
> > RGV 640
> > GRD 896
> > SFB 3
> > NBS 2048
> >
> >
> > PAGE 002
> >
> > NBL 4096
> >
> > IENB 5
> > TFD 0
> > VSS 0
> > VGD 6
> > DRNG NO
> > CDR NO
> > VRAT NO
> > MUS NO
> > RACD NO
> > FRL 0 0
> > FRL 1 0
> > FRL 2 0
> > FRL 3 0
> > FRL 4 0
> > FRL 5 0
> > FRL 6 0
> > FRL 7 0
> > OHQ NO
> > OHQT 00
> > CBQ NO
> > AUTH NO
> > TDET NO
> > TTBL 0
> > ATAN NO
> > PLEV 2
> > ALRM NO
> > ART 0
> > SGRP 0
> > AACR NO
> >
> >
> > Dchannel daughter card on a NT5D12 or an actual MSDL? Jumpers can
> kill!
> >
> > Asterisk Files:
> >
> > zaptel.conf:
> >
> > loadzone = us
> > defaultzone = us
> >
> > #span definitions
> > span = 1,1,0,esf,b8zs
> >
> > #channel definitions
> > bchan = 1-23
> > dchan = 24
> >
> >
> > zapata.conf
> >
> > [channels]
> > context = from-internal
> > switchtype = 5ess
> > usecallerid = yes
> > echocancel = yes
> > echocancelwhenbridged = yes
> > rxgain = 0.0
> > txgain = 0.0
> >
> > signalling = pri_net
> > group = 1
> > channel = 1-23
> >
> > I am using a sangoma A101 (which rocks, btw). Should be the same
> diff...
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list