[Asterisk-Users] Newer version of Zaptel with 1.0 branch of *

[Adam Robins]

I have done this successfully with Asterisk 1.07 and Zaptel 1.09 and
1.2.1 for the same reasons as you.

However, if you ever need to go recompile Asterisk, then you will first
need to recompile the old Zaptel, compile Asterisk and the new Zaptel
again. 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Chris
Earle (CBL)
Sent: Monday, January 23, 2006 4:41 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Newer version of Zaptel with 1.0 branch of *

Is it possible to run the CVS-HEAD/Stable version of Zaptel (1.2
whatever) with an older version of Asterisk? I'm running 1.09, but I was
wondering if I could get at the newer echo cancellers like KB1 and MG2
without upgrading to Asterisk 1.2?


I'm going out on a limb here to try and fix a serious echo problem on a
TDM
+ BT PSTN line in the UK


Thanks for your suggestions everyone


--
Chris Earle
System Solutions Specialist,


--
This message has been scanned for viruses and dangerous content by
MailScanner, and is believed to be clean.

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally privileged. This transmission is sent in trust, for the sole purpose of delivery to the intended recipient. If you have received this transmission in error, any use, reproduction or dissemination of this transmission is strictly prohibited. If you are not the intended recipient, please immediately notify the sender by reply email and delete this message and its attachments, if any.