[Asterisk-Users] G729 and Cisco IOS 12.4

[Bill Gibbs]

Same thing...even with the commercial Digium G729 codec.  I have to
specifiy G729br8 on the Cisco.

Cisco issue?

Bill

-----Original Message-----
From: Bill Gibbs 
Sent: Monday, January 23, 2006 12:01 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] G729 and Cisco IOS 12.4

I have the same issue.  I just bought the commercial version from Digium
to see if that has the same problem.  I wanted to use the free one to
test out g729.  My Polycom 301 had no issues using the free codec though
(testing via VM, etc)

Bill

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Todd
Weiser
Sent: Tuesday, December 20, 2005 12:59 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] G729 and Cisco IOS 12.4

Can anyone confirm that when using the G729 codec from http://kvin.lv/ 
pub/Linux/Asterisk/ and a Cisco gateway running IOS 12.4, codec  
negotiation fails?  When I configure the dial-peer in the router with  
g729r8, it fails.  If I use g729br8 (which uses a built-in VAD), it  
works.  This behavior started since we upgraded the router from 12.3  
(which had no issues).
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users