[Asterisk-Users] Asterisk 1.2.2 - Double Quote on CallerIDCausingSIP Problem (7940)

[Gavin Adams]

Hi Michelle,

Thanks for the response. I made the change but it didn't make a difference.
I'm sure you're right that these is something amiss in my configuration
files, but I'm not sure where. You'd think that Zapata.conf and
extensions.conf would be the only ones.

Anyway, I have a quick fix in place by removing the offending " character,
which makes this better. I'll hook up the line to the a regular POTs and see
if there is a difference the way the ATA-186 presents CID vs. HellSouth.


Regards,

--- Gavin Adams
VP of Technology
Promisant (USA) Inc.

Email: me at gavinadams.org 
Phone: (404) 467-1789
Mobile: (404) 933-8183
Skype: gadams999

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Technical
Support
Sent: Saturday, January 21, 2006 12:10 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Asterisk 1.2.2 - Double Quote on
CallerIDCausingSIP Problem (7940)

Having learned the hard way...here's something I noticed in the code you
posted:

callerid="My name" <404 xxx xxxx>

Try changing to:

callerid=My name <404 xxx xxxx>

Some subtle differences between the bash and asterisk interpreters can cause
experienced users to scratch their heads...(unless there is another problem
this might help)

Michelle Dupuis
Technical Support Specialist
Oxford Consulting Group Ltd.
Making IT work for your business...
 
T: (519) 672-8238
E: support at ocg.ca
W: www.ocg.ca