[Asterisk-Users] TE110p and pri_cpe signalling not recognized

[Domjan Attila]

Hi,
did you compile the asterisk after the libpri install?
check it! 
[root at pbx0 ~]# ldd /usr/lib/asterisk/modules/chan_zap.so
        libpri.so.1 => /usr/lib/libpri.so.1 (0x00002aaaaac30000)
        libtonezone.so.1 => /usr/lib/libtonezone.so.1
(0x00002aaaaad58000)
        libc.so.6 => /lib64/tls/libc.so.6 (0x00002aaaaae7f000)
        libm.so.6 => /lib64/tls/libm.so.6 (0x00002aaaab0b2000)
        /lib64/ld-linux-x86-64.so.2 (0x0000555555554000)

On Thu, 2006-01-05 at 23:07 +0100, Arnar Gestsson wrote:
> Hi there,
> 
> well supposedly I've compiled and installed libpri and it actually
> resides in /usr/lib.  I've installed /usr/lib in the /etc/ld.so.conf
> explicitly but without a luck.  But I'll check this path anyhow more
> thoroughly.
> 
> Thanks for the advice.
> 
> BR. Arnar
> 
> 
> On Thu, 2006-01-05 at 23:01 +0100, Domjan Attila wrote:
> > Hi,
> > I think you didn't install the libpri.
> > 
> > On Thu, 2006-01-05 at 22:48 +0100, Arnar Gestsson wrote:
> > > Hi guys,
> > > 
> > > I've been installing and configuring a TE110p card.  The compile and
> > > install went very well.  I'm using this on FC4 and I compile with
> > > linux26 as well checked I on the udev configs. 
> > > 
> > > zttool and ztcfg both indicate that the card is ready.
> > > 
> > > But when I try to "load chan_zap.so" then I get the following
> > > 
> > > 
> > > Unable to load module chan_zap.so
> > > Jan  5 21:43:33 ERROR[6808]: chan_zap.c:10546 setup_zap: Unknown
> > > signalling method 'pri_cpe'
> > > Jan  5 21:43:33 ERROR[6808]: chan_zap.c:10171 setup_zap: Signalling must
> > > be specified before any channels are.
> > > Jan  5 21:43:33 WARNING[6808]: loader.c:414 __load_resource:
> > > chan_zap.so: load_module failed, returning -1
> > > 
> > > My config is here below.
> > > 
> > > TIA
> > > 
> > > Arnar Gestsson
> > > 
> > > 
> > > /etc/zaptel.conf
> > > 
> > > span=1,1,0,ccs,hdb3,crc4
> > > 
> > > loadzone = nl
> > > loadzone=de
> > > defaultzone=nl
> > > 
> > > bchan=1-5,7-15,17-31
> > > dchan=16
> > > 
> > > /etc/asterisk/zapata.conf
> > > 
> > > [trunkgroups]
> > > trunkgroup => 1,16
> > > spanmap => 1,1
> > > 
> > > [channels]
> > > language=en
> > > context=default
> > > switchtype=euroisdn
> > > pridialplan=unknown
> > > signalling=pri_cpe
> > > ;rxwink=300
> > > usecallerid=yes
> > > hidecallerid=no
> > > callwaiting=yes
> > > usecallingpres=yes
> > > callwaitingcallerid=yes
> > > threewaycalling=yes
> > > transfer=yes
> > > cancallforward=yes
> > > callreturn=yes
> > > echocancel=yes
> > > echocancelwhenbridged=yes
> > > rxgain=5.0
> > > txgain=1.0
> > > echotraining=yes
> > > group=1
> > > callgroup=1
> > > pickupgroup=1
> > > immediate=no
> > > channel => 1-15,17-31
> > > 
> > > 
> > > 
-- 
Domjan Attila <adomjan at tvnet.hu>