[Asterisk-Users] Asterisk PRI problems.

[William Lloyd]

It sounds like it might be dialplan instead of PRI related.

-bill

On 2-Jan-06, at 10:43 AM, Kristian Larsson wrote:

> On Mon, Jan 02, 2006 at 03:36:57PM +0200, steve at daviesfam.org wrote:
>>
>>
>> On Mon, 2 Jan 2006, Kristian Larsson wrote:
>>
>>> I have an Avaya IP Office PBX connected to an
>>> Asterisk system via a Sangoma ISDN PRI card.
>>> Dialing from the as
>>> terisk system into the avaya works just fine but
>>> when trying to call from a phone connected to the
>>> avaya syste
>>> m something goes wrong. After punching the first
>>> four digits the Avaya calls out, shouldn't it wait
>>> for all di
>>> gits and then dial out?
>>> If I try to dial a three digit number it waits for
>>> a while then dials.
>>>
>>> Is this some feature to let the CO know of which
>>> area code the calls is going ahead of time?
>>> Is there some way to circumvent this using hacks
>>> on the asterisk side?
>>
>>
>> Looks like you need to enable overlapdial=yes on the Asterisk  
>> side.  It
>> will then wait for additional digits sent from the Avaya after the  
>> initial
>> ones sent with the SETUP.
> I did try enabling overlapdial=yes but I saw no
> real change. Is there any other variable to go
> with it that I might need to tune?
>
> I am quite new to the whole PRI thing. What does
> it do when setting up a call?
>
> First a SETUP and after that it dials?
>
> Regards,
> Kristian
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users