[Asterisk-Users] fax receive using TDM400P

[Anton Krall]

Yep, been there, done that.

How about this results:

[root at voip asterisk]# /usr/src/zaptel-1.2.4/zttest  -v
Opened pseudo zap interface, measuring accuracy...

8192 samples in 8191 sample intervals 99.987793%
8192 samples in 8192 sample intervals 100.000000%
8192 samples in 8192 sample intervals 100.000000%
8192 samples in 8192 sample intervals 100.000000%
8192 samples in 8192 sample intervals 100.000000%
8192 samples in 8192 sample intervals 100.000000%
8192 samples in 8191 sample intervals 99.987793%
8192 samples in 8192 sample intervals 100.000000%
8192 samples in 8192 sample intervals 100.000000%
8192 samples in 8192 sample intervals 100.000000%
8192 samples in 8193 sample intervals 99.987793%
8192 samples in 8192 sample intervals 100.000000%
8192 samples in 8192 sample intervals 100.000000%
8192 samples in 8192 sample intervals 100.000000%
8192 samples in 8192 sample intervals 100.000000%
--- Results after 15 passes ---
Best: 100.000000 -- Worst: 99.987793 -- Average: 99.997559

Anything above 99.98 is good so.. Why isnt faxing working :( 

|-----Original Message-----
|From: asterisk-users-bounces at lists.digium.com 
|[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
|Rich Adamson
|Sent: Tuesday, February 28, 2006 2:18 AM
|To: Asterisk Users Mailing List - Non-Commercial Discussion
|Subject: RE: [Asterisk-Users] fax receive using TDM400P
|
|
|> Ok 1 for Debian, any Fedoras Core 3 out there? 
|
|fc3, and it doesn't work.
|
|If you check the archives, this has all been discussed before. 
|The issue seems to be more oriented to the specific pci bus 
|implementation on the motherboard. You might also want to run 
|/usr/src/zaptel/zttest and read the archives on that as well.
|
|
|_______________________________________________
|--Bandwidth and Colocation provided by Easynews.com --
|
|Asterisk-Users mailing list
|To UNSUBSCRIBE or update options visit:
|   http://lists.digium.com/mailman/listinfo/asterisk-users
|
|