[Asterisk-Users] Ringing Delay

[chan (Alpha Trilogies Networls)]

Hi,
I did change the RING parameters to my country, but seems like no
improvement, so how to confirm the ringing frequency than from Telco, any
device to test it out?


Date: Mon, 27 Feb 2006 09:28:15 +0100
From: <f6hqz-m at hamwlan.net>
Subject: RE : [Asterisk-Users] Ringing Delay

Hi Chan,

1/ be sure to have correctly inputed your country zone
2/ disable the fax recognition in zapata.conf

Best Regards,
Francois BERGERET,
France.

-----Message d'origine-----
De : asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] De la part de chan (Alpha
Trilogies Networls)
Envoyi : lundi 27 fivrier 2006 08:35
@ : asterisk-users at lists.digium.com
Objet : [Asterisk-Users] Ringing Delay


Hi,
Can some one advice me that how can I make the FXO channels port answer an
incoming calls, means when I call from Lan line to Asterisk TDM400, my phone
get ring immediately. When POT FXO port is ringing, Asterisk seems like
studying the incoming ringing pattern even it did answer the call. I did not
activate the usedestingtive, but why it seems delaying an incoming calls?
Normal PBX, say will only delay 1 cycle as max in analog line, but Asterisk
is about 2 sec...???